R Ahmed, R Liang and MR Mackley.
The experimental observation and numerical prediction of planar entry flow and die swell for molten polyethylene.
Journal of Non-Newtonian Fluid Mechanics, 59, 2-3, 129-153 (1995)
The scientific and technological route to the manufacture of high modulus polyethylene.
Materials Research Society Bulletin, 22, 9, (Sept. 1997)
WK Wee and MR Mackley.
The rheology and processing of a concentrated Cellulose Acetate solution.
Chem. Eng. Sci., 53 (6), 1131-1144 (1998)
C Bower, MR Mackley, BAS Smeulders, D Barker and J Hayes.
The rheology, processing and microstructure of complex fluids.
Modern aspects of Colloid Dispersions, ed. RH Ottewill and AR Rennie, Kluwer, 279-289 (1998)
RM de Roeck and MR Mackley.
The rheology and microstructure of equine blood.
Dynamics of Complex Fluids, ed MJ Adams, RA Mashelkhar, JRA Pearson and AR Rennie, Imperial College Press, 339-345 (1998)
MR Mackley, S Wannaborworn, P Gao and F Zhao.
The optical microscopy of sheared liquids using a newly developed optical stage.
Microscopy and Analysis, 69, 25-29 (1999)
MR Mackley and R Rutgers.
Rheological Measurement, Ed 2, by AA Colyer and DW Clegg, Chapman Hall, 167-188 (1999)
M Ranganthan, MR Mackley and PHJ Spittler.
Experimental observations and modelling of time dependent capillary flow for a high density polyethylene using a multipass rheometer.
Journal of Rheology, 43(2), 443-451 (1999)
MJ Thompson, MR Mackley and JA Nimmo.
The high shear rheology of lithographic emulsions.
Surface Coatings International, 83 (5), 234-239 (2000)
MR Mackley, GD Moggridge and O Saquet.
Direct experimental evidence for the preferential growth of flow induced fibrous polymer crystallisation occurring at a solid / melt interface.
Journal of Material Science, 35 (20), 5247-5254 (2000)
MR Mackley and M Thompson.
The low and high shear rheology of emulsions of water in alkyd resin as a model for lithographic printing inks.
Proc XIII Int. Cong. Rheology, Cambridge, ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 3, 279-281 (2000)
YK Cheng, MR Mackley and T Sayer.
Colour rheology measurements and its link to microstructural change.
Proc XIII Int. Cong. Rheology, Cambridge, ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 3, 40-42 (2000)
RF Liang and MR Mackley.
The gas-assisted extrusion of molten polyethylene.
Journal of Rheology, 45 (1), 211-226 (2001)
Shaping the future in polymer processing.
Emerging Themes in Polymer Science, ed. A.J. Ryan, Royal Society of Chemistry, 215-223 (2001)
K Lee, MR Mackley, TCB Mcleish, TM Nicholson, and O Harlen.
Experimental observation and numerical simulation of transient stress fangs within flowing molten polyethylene.
Journal of Rheology, 45 (6), 1261-1277 (2001)
MJ Thompson, JRA Pearson and MR Mackley
The effect of droplet extension on the rheology of emulsions of water in alkyd resin.
Journal of Rheology, 45 (6), 1341-1358 (2001)
DJ Watson and MR Mackley.
The rheology of aqueous emulsions prepared by direct emulsification and phase inversion from a high viscosity alkyd resin.
Colloids and Surfaces A, 196, 121-134 (2002)
G Stephens and MR Mackley.
Heat Transfer Performance for Batch Oscillatory Flow Mixing.
Journal of Experimental Thermal and Fluid Science, 25 (8), 583-594, (2002)
JF Agassant, F Baaijens, H Bastian, A Bernnat, ACB Bogaerds, T Coupez, B Debbaut, AL Gavrus, A Goublomme, M van Gurp, RJ Koopmans, GHM Laun, K Lee, OH Nouatin, MR Mackley, GWM Peters, G Rekers, WMH Verbeeten, B Vergnes, MH Wagner, E Wassner and WF Zoetelief.
The matching of experimental polymer processing flows to numerical simulation.
International Polymer Processing, 17 (1), 3-10 (2002)
RB Cooke, MR Mackley and GC Maitland.
The effect of air or particulate inclusions on the rheology and processing behaviour of a wormlike micelle base matrix.
6th European Conference of Rheology, ed. H. Munsted, J. Kaschta and A. Merten, Erlangen Germany, Sept 1-6, 437-738 (2002)
A Lele, MR Mackley, G Galgali and C Ramesh.
In situ rheo X-ray investigation of orientation in layered silicate-syndiotactic polypropylene nanocomposite melt.
Journal of Rheology, 46 (5), 1091-1110 (2002)
S Wannaborworn, MR Mackley and Y Renardy.
Experimental observation and matching numerical simulation for the deformation and break up of immiscible drops in oscillatory shear.
Journal of Rheology, 46 (5), 1279-1294 (2002)
YK Chen, MR Mackley and TSB Sayer.
Colour change and microstructure evolution of wet flowing paint when subject to shear.
Chem. Eng. Sci., 58, 2505-2514 (2003)
SA McKeown, MR Mackley and GD Moggridge.
Shear-induced structural changes in a commercial surfactant-based system.
Trans. I. Chem. E., 81A, 649-664 (2003)
MS Liaw, and GD Moggridge
Shear-induced Structures in a Commercial Surfactant-based System: Effect of Various Salts.
Int. J. Appl. Mech. Eng. (Proceedings of the International Conference on Engineering Rheology, August 2003), 8, 73-78 (2003)
MS Law, MR Mackley, J Bridgwater, GD Moggridge and AE Bayly.
Multilayer vesicles in a commercial surfactant system.
AIChE Journal, 49 (11), 2966-2973 (2003)
TR Tuladhar and MR Mackley.
Experimental observations and modelling relating to foaming and bubble growth from pentane loaded polystyrene melts.
Chemical Engineering Science, 59(24), 5997-6014 (2004)
M Garcia-Morales, P Partal, FJ Navarro, F Martinez-Boza, MR Mackley and C Gallegos.
The rheology of recycled EVA/LDPE modified bitumen.
Rheol. Acta 43, 482-490 (2004)
MW Collis and MR Mackley
The melt processing of monodisperse and polydisperse polystyrene melts within a slit entry and exit flow
J. Non-Newtonian Fluid Mech. 128, 29-41 (2005)
P. Yimsiri and M.R. Mackley.
Spin and dip coating of light-emitting polymer solutions: Matching experiment with modelling.
Chemical Engineering Science, 61(11), 3496-3505 (2006)
SS Rahatekar, KKK Koziol, SA Butler, J A Elliott, MSP Shaffer, MR Mackley and A.H. Windle.
Optical microstructure and viscosity enhancement for an epoxy resin matrix containing multi-wall carbon nanotubes.
Journal of Rheology, 50(5), 599-610 (2006)
P Yimsiri and MR Mackley.
Microstructure and device performance of thin film light emitting polymers.
Thin Solid Films, 515(7-8), 3787-3796 (2007)
A Ma and MR Mackley.
Experimental observation on the flow-induced assembly of Carbon nanotube suspensions to form helical bands.
Rheo Acta, 46(7), 979-987 (2007)
TR Tuladhar and MR Mackley.
Filament stretching rheometry and break-up of low viscosity polymer solutions and inkjet fluids.
Journal of Non-Newtonian Fluid Mechanics, 148, 97-108. (2008)
E Cueto, AWK Ma, F Chinesta and MR Mackley.
Numerical simulation of spin coating processes involving functionalised Carbon nanotube suspensions.
Int. Journal of Materials Forming, 1(2), 89-99 (2008)
AWK Ma, F Chinesta, T Tuladhar and MR Mackley.
Filament stretching of carbon nanotube suspensions.
Rheologica Acta, 47(4), 447-457 (2008)
Materials Processing Publications
R Ahmed, R Liang and MR Mackley.