Article

Ishiyama, EM and Heins, AV and Paterson, WR and Spinelli, L and Wilson, DI (2010) Scheduling cleaning in a crude oil preheat train subject to fouling: Incorporating desalter control. Applied Thermal Engineering, 30 (13). pp. 1852-1862. ISSN 13594311

Mascia, S and Seiler, C and Fitzpatrick, S and Wilson, DI (2010) Extrusion–spheronisation of microcrystalline cellulose pastes using a non-aqueous liquid binder. International Journal of Pharmaceutics, 389 (1-2). pp. 1-9. ISSN 03785173

Gordon, PW and Brooker, ADM and Chew, YMJ and Wilson, DI and York, DW (2010) A scanning fluid dynamic gauging technique for probing surface layers. Measurement Science and Technology, 21 (8). p. 085103. ISSN 0957-0233

Hadjiandreou, MM and Conejeros, R and Wilson, DI (2010) HIV Treatment Planning on a Case-by-Case Basis. International Journal of Biological and Medical Sciences , 5 (2). pp. 79-88.

Nigo, RY and Chew, YMJ and Houghton, NE and Paterson, WR and Wilson, DI (2009) Experimental Studies of Freezing Fouling of Model Food Fat Solutions Using a Novel Spinning Disc Apparatus. Energy & Fuels, 23 (12). pp. 6131-6145. ISSN 0887-0624

Hadjiandreou, Marios M. and Conejeros, Raúl and Wilson, D. Ian (2009) Planning of patient-specific drug-specific optimal HIV treatment strategies. Chemical Engineering Science, 64 (18). pp. 4024-4039. ISSN 00092509

Ishiyama, EM and Coletti, F and Macchietto, S and Paterson, WR and Wilson, DI (2009) Impact of deposit ageing on thermal fouling: Lumped parameter model. AIChE Journal, 56 (2). pp. 531-545. ISSN 00011541

Ehlweg, B and Burns, LW and Chew, YMJ and Martin, PJ and Russell, AB and Wilson, DI (2009) Viscous dissipation and apparent wall slip in capillary rheometry of ice cream. Food and Bioproducts Processing, 87 (4). pp. 266-272. ISSN 09603085

Ishiyama, EM and Paterson, WR and Wilson, DI (2009) The Effect of Fouling on Heat Transfer, Pressure Drop, and Throughput in Refinery Preheat Trains: Optimization of Cleaning Schedules. Heat Transfer Engineering, 30 (10-11). pp. 805-814. ISSN 0145-7632

Polley, GT and Morales-Fuentes, A and Wilson, DI (2009) Simultaneous Consideration of Flow and Thermal Effects of Fouling in Crude Oil Preheat Trains. Heat Transfer Engineering, 30 (10-11). pp. 815-821. ISSN 0145-7632

Hadjiandreou, MM and Conejeros, R and Wilson, DI (2009) Long-term HIV dynamics subject to continuous therapy and structured treatment interruptions. Chemical Engineering Science, 64 (7). pp. 1600-1617. ISSN 0009-2509

Patel, MJ and Wedderburn, J and Blackburn, S and Wilson, DI (2009) Maldistribution of fluids in extrudates. Journal of the European Ceramic Society, 29 (5). pp. 937-941. ISSN 0955-2219

Pore, M and Seah, HH and Glover, JWH and Holmes, DJ and Johns, ML and Wilson, DI and Moggridge, GD (2009) In-Situ X-Ray Studies of Cocoa Butter Droplets Undergoing Simulated Spray Freezing. Journal of the American Oil Chemists' Society, 86 (3). pp. 215-225. ISSN 0003-021X

Gu, T and Chew, YMJ and Paterson, WR and Wilson, DI (2009) Experimental and CFD Studies of Fluid Dynamic Gauging in Annular Flows. AIChE Journal, 55 (8). pp. 1937-1947. ISSN 0001-1541

Taylor, JE and Van Damme, I and Johns, ML and Routh, AF and Wilson, DI (2009) Shear Rheology of Molten Crumb Chocolate. Journal of Food Science, 74 (2). E55-E61. ISSN 0022-1147

Hadjiandreou, MM and Conejeros, R and Wilson, DI (2009) Planning of patient-specific drug-specific optimal HIV treatment strategies. Chemical Engineering Science, 64 (18). pp. 4024-4039. ISSN 0009-2509

Gu, T and Chew, YMJ and Paterson, WR and Wilson, DI (2009) Experimental and CFD studies of fluid dynamic gauging in duct flows. Chemical Engineering Science, 64 (2). pp. 219-227. ISSN 0009-2509

Williamson, ME and Wilson, DI (2009) Development of an improved heating system for industrial tunnel baking ovens. Journal of Food Engineering, 91 (1). pp. 64-71. ISSN 0260-8774

Ishiyama, EM and Paterson, WR and Wilson, DI (2008) Platform for Techno-economic Analysis of Fouling Mitigation Options in Refinery Preheat Trains†. Energy & Fuels, 23 (3). pp. 1323-1337. ISSN 0887-0624

Mercadé-Prieto, R and Wilson, DI and Paterson, WR (2008) Effect of the NaOH Concentration and Temperature on the Dissolution Mechanisms of ß-Lactoglobulin Gels in Alkali. International Journal of Food Engineering, 4 (5). Article 9.

Mascia, S and Wilson, DI (2008) Biaxial extensional rheology of granular suspensions: The HBP (Herschel-Bulkley for Pastes) model. Journal of Rheology, 52 (4). pp. 981-998. ISSN 01486055

Mercadé-Prieto, R and Paterson, WR and Chen, XD and Wilson, DI (2008) Diffusion of NaOH into a protein gel. Chemical Engineering Science, 63 (10). pp. 2763-2772. ISSN 0009-2509

Ishiyama, EM and Paterson, WR and Wilson, DI (2008) Thermo-hydraulic channelling in parallel heat exchangers subject to fouling. Chem, 63 (13). pp. 3400-3410. ISSN 0009-2509

Mercadé-Prieto, R and Paterson, WR and Wilson, DI (2008) Comparison between the dissolution of whey protein gels and of synthetic polymers. Journal of Polymer Science Part B: Polymer Physics, 46 (11). pp. 1007-1021. ISSN 08876266

Barker, D and Wilson, DI (2008) Rheology of a thermoplastic paste through the mushy state transition. Chemical Engineering Science, 63 (6). pp. 1438-1448. ISSN 00092509

Mercadé-Prieto, R and Paterson, WR and Wilson, DI (2008) Caustic-induced gelation of β-lactoglobulin. International Journal of Food Science & Technology, 43 (8). pp. 1379-1386. ISSN 09505423

Blackburn, S and Wilson, DI (2008) Shaping ceramics by plastic processing. Journal of the European Ceramic Society, 28 (7). pp. 1341-1351. ISSN 09552219

Sahoo, K and Chew, YMJ and Mercadé-Prieto, R and Wilson, DI and Dai, XW (2008) Fluid dynamic gauging studies of swelling behaviour of whey protein gels in NaOH/NaCl solutions. International Journal of Food Science & Technology, 43 (10). p. 1901. ISSN 09505423

Qi, XG and Scott, DM and Wilson, DI (2008) Modelling laminar pulsed flow in rectangular microchannels. Chemical Engineering Science, 63 (10). pp. 2682-2689. ISSN 0009-2509

Martin, PJ and Odic, KN and Russell, AB and Burns, IW and Wilson, DI (2008) Rheology of commercial and model ice creams. Applied Rheology, 18 (1). pp. 12913-11. ISSN 1430-6395

Morison, KR and Lu, K and Paterson, WR and Mercadé-Prieto, R and Wilson, DI (2008) Dynamic modelling of the swelling of polyelectrolyte protein gels using the Generalised Maxwell-Stefan equation. Macromolecules . ISSN 0024-9297 (Submitted)

Somasundram, IM and Cendrowicz, A and Wilson, DI and Johns, ML (2008) Phenomenological study and modelling of wick debinding. Chemical Engineering Science, 63 (14). pp. 3802-3809. ISSN 0009-2509

White, DE and Moggridge, GD and Wilson, DI (2008) Solid-liquid transitions in the rheology of a structured yeast extract paste, Marmite (TM). Journal of Food, 88 (3). pp. 353-363. ISSN 0260-8774

Patel, MJ and Blackburn, S and Wilson, DI (2007) Modelling of paste flows subject to liquid phase migration. International Journal for Numerical Methods in Engineering, 72 (10). pp. 1157-1180. ISSN 00295981

Mercadé-Prieto, R and Sahoo, K and Falconer, RJ and Paterson, WR and Wilson, DI (2007) Polyelectrolyte screening effects on the dissolution of whey protein gels at high pH conditions. Food Hydrocolloids, 21 (8). pp. 1275-1284. ISSN 0268005X

Mascia, S and Wilson, DI (2007) Rheology of concentrated granular suspensions undergoing squeeze flow. Journal of Rheology, 51 (3). pp. 493-515. ISSN 0148-6055

Yoo, JY and Chen, XD and Mercadé-Prieto, R and Wilson, DI (2007) Dissolving heat-induced protein gel cubes in alkaline solutions under natural and forced convection conditions. Journal of Food Engineering, 79 (4). pp. 1315-1321. ISSN 02608774

Mercadé-Prieto, R and Paterson, WR and Wilson, DI (2007) The pH Threshold in the Dissolution of β-Lactoglobulin Gels and Aggregates in Alkali. Biomacromolecules, 8 (4). pp. 1162-1170. ISSN 15257797

Chew, YMJ and Paterson, WR and Wilson, DI (2007) Fluid dynamic gauging: A new tool to study deposition on porous surfaces. Journal of Membrane Science, 296 (1-2). p. 29. ISSN 03767388

Polley, GT and Wilson, DI and Pugh, SJ and Petitjean, E (2007) Extraction of Crude Oil Fouling Model Parameters from Plant Exchanger Monitoring. Heat Transfer Engineering, 28 (3). pp. 185-192. ISSN 0145-7632

Bode, K and Hooper, RJ and Paterson, WR and Wilson, DI and Augustin, W and Scholl, S (2007) Pulsed Flow Cleaning of Whey Protein Fouling Layers. Heat Transfer Engineering, 28 (3). pp. 202-209. ISSN 0145-7632

Mercadé-Prieto, R and Falconer, RJ and Paterson, WR and Wilson, DI (2007) Swelling and Dissolution of β-Lactoglobulin Gels in Alkali. Biomacromolecules, 8 (2). pp. 469-476. ISSN 1525-7797

Murray, T and Rough, SL and Wilson, DI (2007) The effect of drying technique on tablets formed from extrusion-spheronization granules. Chemical Engineering Research and Design, 85 (A7). pp. 996-1004. ISSN 02638762

Chew, YMJ and Paterson, WR and Wilson, DI (2007) Fluid dynamic gauging: a new technique for studying membrane fouling. Water Science & Technology: Water Supply, 7 (5-6). pp. 175-184. ISSN 1606-9749

Saikhwan, P and Chew, YMJ and Paterson, WR and Wilson, DI (2007) Swelling and Its Suppression in the Cleaning of Polymer Fouling Layers. Industrial & Engineering Chemistry Research, 46 (14). p. 4846. ISSN 0888-5885

Saikhwan, P and Chew, YMJ and Paterson, WR and Wilson, DI (2007) Fluid dynamic gauging: a technique for studying the cleaning of food process surfaces. Food Manufacturing Efficiency, 1 (2). pp. 35-41. ISSN 1750-2691

Song, B and Rough, SL and Wilson, DI (2007) Effects of drying technique on extrusion-spheronisation granules and tablet properties. International Journal of Pharmaceutics, 332 (1-2). pp. 38-44. ISSN 0378-5173

Mercadé-Prieto, R and Falconer, RJ and Paterson, WR and Wilson, DI (2006) Probing The Mechanisms Limiting Dissolution of Whey Protein Gels During Cleaning. Food and Bioproducts Processing, 84 (4). pp. 311-319. ISSN 09603085

Hooper, RJ and Liu, W and Fryer, PJ and Paterson, WR and Wilson, DI and Zhang, Z (2006) Comparative Studies of Fluid Dynamic Gauging and a Micromanipulation Probe for Strength Measurements. Food and Bioproducts Processing, 84 (4). pp. 353-358. ISSN 0960-3085

Hooper, RJ and Paterson, WR and Wilson, DI (2006) Comparison of Whey Protein Model Foulants for Studying Cleaning of Milk Fouling Deposits. Food and Bioproducts Processing, 84 (4). pp. 329-337. ISSN 09603085

Russell, BD and Ovaici, H and Lasenby, J and Beckett, ST and Wilson, DI (2006) Real-time monitoring of chocolate extrusion by signal processing of pressure transducer data. Food Control, 17 (11). pp. 862-867. ISSN 09567135

Saikhwan, P and Geddert, T and Augustin, W and Scholl, S and Paterson, WR and Wilson, DI (2006) Effect of surface treatment on cleaning of a model food soil. Surface and Coatings Technology, 201 (3-4). pp. 943-951. ISSN 02578972

Barker, D and Wilson, DI (2006) Temperature profiles in a controlled-stress parallel plate rheometer. Rheologica Acta, 46 (1). pp. 23-31. ISSN 0035-4511

Martin, PJ and Wilson, DI and Bonnett, PE (2006) Paste extrusion through non-axisymmetric geometries: Insights gained by application of a liquid phase drainage criterion. Powder Technology, 168 (2). p. 64. ISSN 00325910

Mercadé-Prieto, R and Falconer, RJ and Paterson, WR and Wilson, DI (2006) Effect of Gel Structure on the Dissolution of Heat-Induced β-Lactoglobulin Gels in Alkali. Journal of Agricultural and Food Chemistry, 54 (15). pp. 5437-5444. ISSN 0021-8561

Bode, K and Hooper, RJ and Paterson, WR and Wilson, DI and Augustin, W and Scholl, S (2006) Reinigung von Molkeproteinablagerungen mit pulsierender Strömung. Chemie Ingenieur Technik, 78 (5). pp. 613-620. ISSN 0009-286X

Chew, YMJ and Tonneijk, SJ and Paterson, WR and Wilson, DI (2006) Solvent-based cleaning of emulsion polymerization reactors. Chemical Engineering Journal, 117 (1). pp. 61-69. ISSN 13858947

Russell, BD and Blackburn, S and Wilson, DI (2006) A study of surface fracture in paste extrusion using signal processing. Journal of Materials Science, 41 (10). pp. 2895-2906. ISSN 0022-2461

Peck, MC and Rough, SL and Barnes, J and Wilson, DI (2006) Roller extrusion of biscuit doughs. Journal of Food Engineering, 74 (4). pp. 431-450. ISSN 0260-8774

Celnik, MS and Patel, MJ and Pore, M and Scott, DM and Wilson, DI (2006) Modelling laminar pulsed flow for the enhancement of cleaning. Chemical Engineering Science, 61 (6). pp. 2079-2084. ISSN 0009-2509

Russell, BD and Wilson, DI and Lasenby, J and Blackburn, S (2006) Selection of signal processing techniques for extracting quantitative indicators of paste quality from extrusion pressure data. Chemical Engineering Communications, 193 (8). pp. 986-1007. ISSN 0098-6445

Wilson, DI and Rough, SL (2006) Exploiting the curious characteristics of dense solid-liquid pastes. In: The John Bridgwater Symposium "Shaping the Future of Chemical Engineering. Chemical Engineering Science, 61 (13). pp. 4147-4154. ISSN 0009-2509

Mascia, S and Patel, MJ and Rough, SL and Martin, PJ and Wilson, DI (2006) Liquid phase migration in the extrusion and squeezing of microcrystalline cellulose pastes. European Journal of Pharmaceutical Sciences, 29 (1). pp. 22-34. ISSN 0928-0987

Gwie, CG and Griffiths, RJ and Cooney, DT and Johns, ML and Wilson, DI (2006) Microstructures formed by spray freezing of food fats. Journal of the American Oil Chemists' Society, 83 (12). pp. 1053-1062. ISSN 0003-021X

MacLeod, CS and McKittrick, JA and Hindmarsh, JP and Johns, ML and Wilson, DI (2006) Fundamentals of spray freezing of instant coffee. Journal of Food Engineering, 74 (4). pp. 451-461. ISSN 0260-8774

Barnes, EC and Wilson, DI and Johns, ML (2006) Velocity profiling inside a ram extruder using magnetic resonance (MR) techniques. Chemical Engineering Science, 61 (5). pp. 1357-1367. ISSN 0009-2509

Barnes, EC and Hollingsworth, KG and Wilson, DI and Johns, ML (2005) Magnetic Resonance Studies of Liquid–Soft Solid Mixing by Extrusion. Chemical Engineering Research and Design, 82 (10). pp. 1360-1366. ISSN 02638762

Engmann, J and Peck, MC and Wilson, DI (2005) An Experimental and Theoretical Investigation of Bread Dough Sheeting. Food and Bioproducts Processing, 83 (3). pp. 175-184. ISSN 09603085

Barker, D and Wilson, DI (2005) Measurement of the Thermophysical Properties of a Thermoplastic Ceramic Paste Across its Solidification Range Using Power-Compensated Differential Scanning Calorimeter. Journal of the American Ceramic Society, 88 (11). pp. 3116-3124. ISSN 0002-7820

Chew, YMJ and Tonneijk, SJ and Paterson, WR and Wilson, DI (2005) Mechanisms in the Solvent Cleaning of Emulsion Polymerization Reactor Surfaces. Industrial & Engineering Chemistry Research, 44 (13). pp. 4605-4616. ISSN 0888-5885

Martin, PJ and Wilson, DI (2005) A critical assessment of the Jastrzebski interface condition for the capillary flow of pastes, foams and polymers. Chemical Engineering Science, 60 (2). pp. 493-502. ISSN 00092509

Yeap, BL and Wilson, DI and Polley, GT and Pugh, SJ (2005) Retrofitting crude oil refinery heat exchanger networks to minimise fouling while maximising heat recovery. Heat Transfer Engineering, 26 (1). pp. 23-34. ISSN 0145-7632

Cheyne, A and Barnes, J and Wilson, DI (2005) Extrusion behaviour of cohesive potato starch pastes: I. Rheological characterisation. Journal of Food Engineering, 66 (1). pp. 1-12. ISSN 02608774

Cheyne, A and Barnes, J and Gedney, S and Wilson, DI (2005) Extrusion behaviour of cohesive potato starch pastes: II. Microstructure-process interactions. Journal of Food Engineering, 66 (1). pp. 13-24. ISSN 02608774

Chew, YMJ and Paterson, WR and Wilson, DI and Höfling, V and Augustin, W (2005) A Method for Measuring the Strength of Scale Deposits on Heat Transfer Surfaces. Developments in Chemical Engineering and Mineral Processing, 13 (1-2). pp. 21-30.

Polley, GT and Wilson, DI and Petitjean, E and Derouin, C (2005) The fouling limit in crude oil pre-heat train design. Hydrocarbon Processing . pp. 71-80.

Wilson, DI (2005) Challenges in Cleaning: Recent Developments and Future Prospects. Heat Transfer Engineering, 26 (1). pp. 51-59. ISSN 0145-7632

Hindmarsh, JP and Sederman, AJ and Gladden, LF and Wilson, DI and Johns, ML (2005) Rapid measurement of dispersion and velocity in freezing drops using magnetic resonance methods. Experiments in Fluids, 38 (6). pp. 750-758. ISSN 0723-4864

Rough, SL and Wilson, DI and York, DW (2005) A regime map for stages in high shear mixer agglomeration using ultra-high viscosity binders. Advanced Powder Technology, 16 (4). pp. 373-386. ISSN 0921-8831

Rough, SL and Wilson, DI (2005) Extrudate fracture and spheronisation of microcrystalline cellulose pastes. Journal of Materials Science, 40 (16). pp. 4199-4219. ISSN 0022-2461

Peck, MC and Rough, SL and Wilson, DI (2005) Roller extrusion of a ceramic paste. Industrial & Engineering Chemistry Research, 44 (11). pp. 4099-4111. ISSN 0888-5885

Hindmarsh, JP and Wilson, DI and Johns, ML (2005) Using magnetic resonance to validate predictions of the solid fraction formed during recalescence of freezing drops. International Journal of Heat and Mass Transfer, 48 (5). pp. 1017-1021. ISSN 0017-9310

Hindmarsh, JP and Wilson, DI and Johns, ML and Russell, AB and Chen, XD (2005) NMR verification of single droplet freezing models. AIChE Journal, 51 (10). pp. 2640-2648. ISSN 0001-1541

Rough, SL and Wilson, DI and York, DW (2005) Effect of solids formulation on the manufacture of high shear mixer agglomerates. Advanced Powder Technology, 16 (2). pp. 145-169. ISSN 0921-8831

Chew, YMJ and Paterson, WR and Wilson, DI (2004) Fluid dynamic gauging for measuring the strength of soft deposits. Journal of Food Engineering, 65 (2). pp. 175-187. ISSN 02608774

Martin, PJ and Wilson, DI and Bonnett, PE (2004) Rheological study of a talc-based paste for extrusion-granulation. Journal of the European Ceramic Society, 24 (10-11). pp. 3155-3168. ISSN 0955-2219

Chew, YMJ and Paterson, WR and Wilson, DI and Höfling, V and Augustin, W (2004) Dynamische Messung der Dicke und der mechanischen Eigenschaften von weichen Ablagerungen. Chemie Ingenieur Technik, 76 (7). pp. 1021-1025. ISSN 0009-286X

Russell, BD and Lasenby, J and Blackburn, S and Wilson, DI (2004) Monitoring Structural Aspects of Pastes Undergoing Continuous Extrusion Using Signal Processing of Pressure Data. Chemical Engineering Research and Design, 82 (6). pp. 770-783. ISSN 02638762

Yeap, BL and Wilson, DI and Polley, GT and Pugh, SJ (2004) Mitigation of Crude Oil Refinery Heat Exchanger Fouling Through Retrofits Based on Thermo-Hydraulic Fouling Models. Chemical Engineering Research and Design, 82 (1). p. 53. ISSN 02638762

Fitzgerald, AM and Barnes, J and Smart, I and Wilson, DI (2004) A Model Experimental Study of Coring by Palm Oil Fats in Distribution Lines. Food and Bioproducts Processing, 82 (3). pp. 207-212. ISSN 09603085

Hindmarsh, JP and Hollingsworth, KG and Wilson, DI and Johns, ML (2004) An NMR study of the freezing of emulsion-containing drops. Journal of Colloid and Interface Science, 275 (1). pp. 165-171. ISSN 00219797

Hindmarsh, JP and Wilson, DI and Johns, ML (2004) Measuring self-diffusion in super-cooled liquid droplets with pulsed gradient spin echo (PGSE) techniques. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 234 (1-3). pp. 129-134. ISSN 09277757

Chew, JYM and Cardoso, SSS and Paterson, WR and Wilson, DI (2004) CFD studies of dynamic gauging. Chemical Engineering Science, 59 (16). pp. 3381-3398. ISSN 0009-2509

Rough, SL and Wilson, DI (2004) The production of homogeneous extrudates of microcrystalline cellulose pastes. International Journal of Pharmaceutics, 276 (1-2). pp. 185-189. ISSN 0378-5173

Hindmarsh, JP and Buckley, C and Russell, AB and Chen, XD and Gladden, LF and Wilson, DI and Johns, ML (2004) Imaging droplet freezing using MRI. Chemical Engineering Science, 59 (10). pp. 2113-2122. ISSN 0009-2509

Russell, BD and Lasenby, J and Blackburn, S and Wilson, DI (2003) Characterising paste extrusion behaviour by signal processing of pressure sensor data. Powder Technology, 132 (2-3). pp. 233-248. ISSN 00325910

Tuladhar, TR and Paterson, WR and Wilson, DI (2003) Dynamic Gauging in Duct Flows. Canadian Journal of Chemical Engineering, 81 (2). pp. 279-284. ISSN 0008-4034

Chou, S and Sydow, K and Martin, PJ and Bridgwater, J and Wilson, DI (2003) Stress relaxation in the extrusion of pastes. Journal of the European Ceramic Society, 23 (5). pp. 637-646. ISSN 0955-2219

Johns, ML and Sederman, AJ and Gladden, LF and Wilson, DI and Davies, S (2003) Using MR techniques to probe permeability reduction in rock cores. AIChE Journal, 49 (5). pp. 1076-1084. ISSN 0001-1541

Rough, SL and Wilson, DI and Bayly, A and York, D (2003) Tapping characterisation of high shear mixer agglomerates made with ultra-high viscosity binders. Powder Technology, 132 (2-3). pp. 249-266. ISSN 0032-5910

Kee, WL and Ma, S and Wilson, DI (2002) Thermal diffusivity measurments of pet food. International Journal of Food Properties, 5 (1). pp. 145-151. ISSN 1094-2912

Tuladhar, TR and Paterson, WR and Wilson, DI (2002) Thermal Conductivity of Whey Protein Films Undergoing Swelling: Measurement by Dynamic Gauging. Food and Bioproducts Processing, 80 (4). pp. 332-339. ISSN 0960-3085

Polley, GT and Wilson, DI and Yeap, BL and Pugh, SJ (2002) Use of crude oil fouling threshold data in heat exchanger design. Applied Thermal Engineering, 22 (7). pp. 763-776. ISSN 13594311

Polley, GT and Wilson, DI and Yeap, BL and Pugh, SJ (2002) Evaluation of laboratory crude oil threshold fouling data for application to refinery pre-heat trains. Applied Thermal Engineering, 22 (7). pp. 777-788. ISSN 13594311

Rahman, L and Rowe, P and Cheyne, A and Wilson, DI (2002) Ram Extrusion of Potato Starch Dough Through Multi-Holed Dies. Food and Bioproducts Processing, 80 (1). pp. 12-19. ISSN 09603085

Wilson, DI and Polley, GT and Pugh, SJ (2002) Mitigation of Crude Oil Preheat Train Fouling by Design. Heat Transfer Engineering, 23 (1). pp. 24-37. ISSN 0145-7632

Rough, SL and Bridgwater, J and Wilson, DI (2002) In situ measurements of porosities and permeabilities of alumina pastes. Powder Technology, 123 (2-3). pp. 262-274. ISSN 0032-5910

Rough, SL and Wilson, DI and Bridgwater, J (2002) A model describing liquid phase migration within an extruding microcrystalline cellulose paste. Chemical Engineering Research and Design, 80 (A7). pp. 701-714. ISSN 02638762

Hiseman, MJP and Laurent, BFC and Bridgwater, J and Wilson, DI and Parker, DJ and North, N and Merrifield, DR (2002) Granular flow in a planetary mixer. Chemical Engineering Research and Design, 80 (A5). pp. 432-440. ISSN 02638762

Smaïli, F and Vassiliadis, VS and Wilson, DI (2002) Optimization of cleaning schedules in heat exchanger networks subject to fouling. Chemical Engineering Communications, 189 (11). pp. 1517-1549. ISSN 0098-6445

Smaïli, F and Vassiliadis, VS and Wilson, DI (2002) Long-term scheduling of cleaning of heat exchanger networks - Comparison of outer approximation-based solutions with a backtracking threshold accepting algorithm. Chemical Engineering Research and Design, 80 (A6). pp. 561-578. ISSN 02638762

Wilson, DI (2002) Managing Interfaces. Food and Bioproducts Processing, 80 (4). pp. 221-222. ISSN 09603085

Smaïli, F and Vassiliadis, VS and Wilson, DI (2001) Mitigation of Fouling in Refinery Heat Exchanger Networks by Optimal Management of Cleaning. Energy & Fuels, 15 (5). pp. 1028-1056. ISSN 0887-0624

Fernandez-Torres, MJ and Fitzgerald, AM and Paterson, WR and Wilson, DI (2001) A theoretical study of freezing fouling: limiting behaviour based on a heat and mass transfer analysis. Chemical Engineering and Processing, 40 (4). pp. 335-344. ISSN 02552701

Fitzgerald, AM and Barnes, OJ and Smart, I and Wilson, DI (2001) Measurement of particle size distribution of tripalmitin crystals in a model solution using a laser diffraction method. Journal of the American Oil Chemists' Society, 78 (10). pp. 1013-1020. ISSN 0003-021X

Bridge, SP and Robbins, PT and Paterson, WR and Wilson, DI (2001) A pneumatic gauging sensor for measuring the thickness of soft films. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 215 (1). pp. 19-27. ISSN 0954-4089

Gillham, CR and Fryer, PJ and Hastings, APM and Wilson, DI (2000) Enhanced cleaning of whey protein soils using pulsed flows. Journal of Food Engineering, 46 (3). pp. 199-209. ISSN 02608774

Rough, SL and Bridgwater, J and Wilson, DI (2000) Effects of liquid phase migration on extrusion of microcrystalline cellulose pastes. International Journal of Pharmaceutics, 204 (1-2). pp. 117-126. ISSN 03785173

Angadi, D and Hatch, CM and Smaïli, F and Herbert, O and Vassiliadis, VS and Wilson, DI (2000) Optimisation of cleaning schedules in heat exchanger networks: Sugar refinery case study. Food and Bioproducts Processing, 77 (2). pp. 159-164. ISSN 0960-3085

Gillham, CR and Fryer, PJ and Hastings, APM and Wilson, DI (2000) Cleaning-in-place of whey protein fouling deposits: Mechanisms controlling cleaning. Food and Bioproducts Processing, 77 (2). pp. 127-136. ISSN 0960-3085

Rough, SL and Bridgwater, J and Wilson, DI (2000) Effects of liquid phase migration on extrusion of microcrystalline cellulose pastes. International Journal of Pharmaceutics, 204 (1-2). pp. 117-126. ISSN 0378-5173

Tuladhar, TR and Paterson, WR and Macleod, N and Wilson, DI (2000) Development of a novel non-contact proximity gauge for thickness measurement of soft deposits and its application in fouling studies. Canadian Journal of Chemical Engineering, 78 (5). pp. 935-947. ISSN 0008-4034

See, HJ and Vassiliadis, VS and Wilson, DI (1999) Optimisation of membrane regeneration scheduling in reverse osmosis networks for seawater desalination1. Desalination, 125 (1-3). pp. 37-54. ISSN 00119164

Amarasinghe, ADUS and Wilson, DI (1999) On-Line Monitoring of Ceramic Paste Extrusion. Journal of the American Ceramic Society, 82 (9). pp. 2305-2312. ISSN 0002-7820

Amarasinghe, ADUS and Wilson, DI (1998) Interpretation of Paste Extrusion Data. Chemical Engineering Research and Design, 76 (1). p. 3. ISSN 02638762

Bayfield, M and Haggett, JA and Williamson, MJ and Wilson, DI and Zagar, A (1998) Liquid phase migration in the extrusion of icing sugar pastes. Food and Bioproducts Processing, 76 (1). pp. 39-46. ISSN 0960-3085

Davies, TJ and Henstridge, S and Gillham, CR and Wilson, DI (1997) Investigation of whey protein deposit properties using heat flux sensors. Food and Bioproducts Processing, 75 (2). pp. 106-110. ISSN 0960-3085

Watkinson, AP and Wilson, DI (1997) Chemical reaction fouling: A review. Experimental Thermal and Fluid Science, 14 (4). pp. 361-374. ISSN 08941777

Watkinson, AP and Wilson, DI (1996) A study of autoxidation reaction fouling in heat exchangers. The Canadian Journal of Chemical Engineering, 74 (2). pp. 236-246. ISSN 00084034

Wilson, DI and Watkinson, AP (1995) Model experiments of autoxidation reaction fouling. I. Mechanisms. Chemical Engineering Research and Design, 73 . pp. 59-68. ISSN 02638762

Wilson, DI and Lai, RC and Watkinson, AP (1995) Model experiments of autoxidation reaction fouling. II. Effect of flow parameters and antioxidants. Chemical Engineering Research and Design, 74 (2). pp. 69-77. ISSN 02638762

Book

Wilson, DI and Chew, YMJ and Fryer, PJ and Hastings, APM, eds. (2006) Fouling, Cleaning and Disinfection in Food Processing. University of Cambridge, Department of Chemical Engineering, Cambridge England. ISBN 0954248317

Wilson, DI and Fryer, PJ and Hastings, APM, eds. (2002) Fouling, Cleaning and Disinfection in Food Processing. University of Cambridge, Department of Chemical Engineering, Cambridge, England. ISBN 0-9542483-0-9

Wilson, DI and Fryer, PJ and Hasting, APM, eds. (1998) Fouling and Cleaning in Food Processing. EU, Brussels. ISBN 92 828 5609 7

Book Section

Wilson, DI and Rough, SL (2007) Extrusion-Spheronisation. In: Handbook of Powder Technology. Elsevier, Amsterdam, pp. 189-210. ISBN 0-444-51871-1

Yeap, BL and Wilson, DI and Polley, GT and Pugh, SJ (2002) Incorporation of fouling models into the design of heat transfer networks. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications, Germany, pp. 107-110. ISBN 393473605X

Wilson, DI and Vassiliadis, VS and Smaïli, F (2002) Mitigating fouling at the plant scale by strategic cleaning: Potential, pitfalls, and needs. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications, Germany, pp. 325-332. ISBN 393473605X

Yeap, BL and Hewitt, GF and Wilson, DI and Pugh, SJ (2002) Simulating the fouling behaviour in shell-and-tube heat exchangers. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications, Germany, pp. 275-282. ISBN 393473605X

Chen, XD and Chen, J and Wilson, DI (2002) Modelling whey protein based fouling of heat exchangers – further examining the deposition mechanisms. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications Germany, pp. 153-162. ISBN 393473605X

Tuladhar, TR and Paterson, WR and Wilson, DI (2002) A study of swelling and removal in cleaning processes. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications, Germany, pp. 99-106. ISBN 393473605X

Wilson, DI and Paterson, WR and Fernandez-Torres, MJ and Fitzgerald, AM (2002) Coring: deposition of fats and waxes in pipelines. In: 4th International Conference on Heat Exchanger Fouling. Fundamental Approaches and Technical Solutions. Publico Publications, Germany, pp. 91-98. ISBN 393473605X

Cheyne, A and Barnes, OJ and Wilson, DI (2000) Modelling of starch extrusion and damage in industrial forming processes. In: Starch – Advances in Structure and Function. Starch: Advances in Structure and Function . Royal Society of Chemistry, Cambridge. ISBN 085404860X

See, HJ and Vassiliadis, VS and Wilson, DI (2000) Integration of maintenance and operation into the design of reverse osmosis membrane networks. In: Membrane Technology in Water and Wastewater Treatment. ROYAL SOC CHEMISTRY, pp. 258-259.

Wilson, DI (1999) Heat Exchanger Design Handbook 2nd Edition - Fouling Section. In: UNSPECIFIED Hemisphere.

Asomaning, A and Wilson, DI and Watkinson, AP (1995) Effects of Oxygen on Fouling by Oxygen in Hydrocarbon Mixtures. In: Mitigation of Industrial Heat Exchanger Fouling, Engineering Foundation Conference. Begell House, pp. 437-450.

Wilson, DI and Watkinson, AP (1995) Mitigation of Chemical Reaction Fouling. In: Mitigation of Industrial Heat Exchanger Fouling, Engineering Foundation Conference. Begell House, pp. 461-472.

Wilson, DI and Watkinson, AP (1992) Solvent Effects in Chemical Reaction Fouling. In: Heat Transfer. Institution of Chemical Engineers Symposium Series No. 129 . IChemE, pp. 987-994. ISBN 1560322586

Bradley, SE and Fryer, PJ and Griffin, TA and Wilson, DI (1989) Use of an Oscillatory Flow Heat Exchanger in Food Processing. In: Fouling and Cleaning in Food Processing. Institute for Dairy Science and Food Processing, Technische Universität München, München, Deutschland, pp. 14-24.

Conference or Workshop Item

Lister, VY and Lucas, CM and Gordon, PW and Chew, YMJ and Wilson, DI (2010) Pressure Mode Gauging: Application to Microfiltration. In: Part 2B Poster Presentations 2010, March 2010, Department of Chemical Engineering and Biotechnology.

Chew, YMJ and Paterson, WR and Wilson, DI (2009) Fluid dynamic gauging: A new technique for measuring the thickness and strength of filter cake on membrane surfaces: Paper 181. In: 5th International Water Association Membrane Technology Conference and Exhibition, 1-3 September 2009, Beijing.

Macchietto, S and Hewitt, GF and Coletti, F and Crittenden, BD and Dugwell, DR and Galindo, A and Jackson, G and Kandiyoti, R and Kazarian, SG and Luckham, PF and Matar, OK and Millan-Agorio, M and Müller, EA and Paterson, WR and Pugh, SJ and Richardson, SM and Wilson, DI (2009) Fouling in crude oil preheat trains: a systematic solution to an old problem. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Gordon, PW and Chew, YMJ and Wilson, DI (2009) Development of the scanning fluid dynamic gauge. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Gu, T and Albert, G and Augustin, W and Scholl, S and Chew, YMJ and Paterson, WR and Sheikh, I and Wang, K and Wilson, DI (2009) Fluid dynamic gauging applied to annular test apparatuses for fouling and cleaning. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Wilson, DI and Ishiyama, EM and Paterson, WR and Watkinson, AP (2009) Ageing – looking back and looking forward. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Nigo, RY and Chew, YMJ and Houghton, NE and Paterson, WR and Wilson, DI (2009) Experimental and CFD studies of fat fouling in a novel spinning disc system. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Ishiyama, EM and Wilson, DI and Paterson, WR and Heins, AV and Spinelli, L (2009) The importance of control considerations for the preheat trains of crude distillation units: a case study. In: EUROTHERM International Conference on Heat Exchanger Fouling and Cleaning - 2009, 14-19 June 2009, Schladming, Austria.

Mercadé-Prieto, R and Paterson, WR and Wilson, DI (2009) Effect of salts on the alkaline degradation of beta-lactoglobulin gels and aggregates: Existence of a dissolution threshold. In: 9th International Hydrocolloids Conference, JUN 15-19, 2008, Singapore, SINGAPORE.

Ishiyama, EM and Paterson, WR and Wilson, DI (2009) Platform for Techno-economic Analysis of Fouling Mitigation Options in Refinery Preheat Trains. In: 9th International Conference on Petroleum Phase Behavior and Fouling, JUN 15-19, 2008, Victoria, CANADA.

Hadjiandreou, MM and Conejeros, R and Wilson, DI (2009) HIV treatment planning on a case-by-case basis. In: International Conference on Bioengineering and Biotechnology, August 26-28 2009, Singapore.

Ishiyama, EM and Paterson, WR and Wilson, DI (2008) Platform for Techno-economic Analysis of Fouling Mitigation Options in Refinery Preheat Trains. In: 9th International Conference on Petroleum Phase Behavior and Fouling, JUN 15-19, 2008, Victoria, CANADA.

White, DE and Moggridge, GD and Wilson, DI (2008) Novel rheology in a structured food product - Marmite (TM). In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Somasundram, IM and Cendrowicz, A and Johns, ML and Wilson, DI (2008) A new understanding of wick debinding. In: 16th International Drying Symposium, Hyderabad, India.

Hadjiandreou, MM and Conejeros, R and Vassiliadis, VS and Wilson, DI (2008) Long-term HIV dynamics: mathematical modelling and optimal control. In: The 2008 International Conference on Bioinformatics & Computational Biology, Las Vegas.

Polley, GT and Morales-Fuentes, A and Wilson, DI (2007) Simultaneous consideration of flow and thermal effects of fouling in crude oil preheat trains. In: Heat Exchanger Fouling and Cleaning VII, July 1-6, 2007, Tomar, Portugal.

Gu, T and Chew, YMJ and Paterson, WR and Wilson, DI (2007) Fluid dynamic gauging in duct flows - experiments and CFD simulations. In: Heat Exchanger Fouling and Cleaning VII, July 1-6, 2007, Tomar, Portugal.

Mercadé-Prieto, R and Paterson, WR and Wilson, DI (2007) The science of cleaning of dairy fouling layers. In: Heat Exchanger Fouling and Cleaning VII, July 1-6, 2007, Tomar, Portugal.

Ishiyama, EM and Paterson, WR and Wilson, DI (2007) The effect of fouling on heat transfer, pressure drop and throughput in refinery preheat trains: optimisation of cleaning schedules. In: Heat Exchanger Fouling and Cleaning VII, July 1-6, 2007, Tomar, Portugal.

Ellis, RR and Wilson, DI and Johns, ML (2006) Magnetic resonance imaging (MRI) and modelling studies of drying phenomena. In: 15th International Drying Symposium (IDS- 2006), 2006, Budapest, Hungary..

Patel, MJ and Wedderburn, J and Blackburn, S and Wilson, DI (2006) Maldistribution of fluids in extrudates. In: Shaping 3. Third International Conference on Shaping of Advance Ceramics, May, 10-12, 2006, Limoges, France.

Celnik, MS and Patel, MJ and Pore, M and Brahim, M and Augustin, F and Scholl, S and Scott, DM and Wilson, DI (2005) Analytical approaches for calculation of shear stress enhancement in laminar pulsed flows. In: 6th International Conference on Heat Exchanger Fouling and Cleaning, June 5-10, 2005, Kloster Irsee.

Celnik, MS and Patel, MJ and Pore, M and Brahim, F and Augustin, W and Scholl, S and Scott, DM and Wilson, DI (2005) Analytical approaches for calculation of shear stress enhancement in laminar pulsed flows. In: Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, June 5-10, 2005, Kloster Irsee, Germany.

Bode, K and Hooper, RJ and Augustin, W and Paterson, WR and Wilson, DI and Scholl, S (2005) Pulsed flow cleaning of whey protein fouling layers. In: Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, June 5-10, 2005, Kloster Irsee, Germany.

Rough, SL and Wilson, DI and Bayly, AE and York, DW (2005) Mechanisms in high-viscosity immersion-granulation. In: 2nd International Workshop on Granulation, JUN 22-25, 2004, Sheffield, ENGLAND.

Mercadé-Prieto, R and Chen, RM and Falconer, RJ and Paterson, WR and Wilson, DI (2005) The poor performance of NaOH in the dissolution of whey protein gels at very high pH. In: Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, June 5-10, 2005, Kloster Irsee, Germany.

Polley, GT and Wilson, DI and Pugh, SJ and Petitjean, E (2005) Extraction of crude oil fouling model parameters from plant exchanger monitoring. In: Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, June 5-10, 2005, Kloster Irsee, Germany.

Wilson, DI and Polley, GT and Pugh, SJ (2005) Ten years of Ebert, Panchal and the ‘Threshold Fouling’ concept. In: Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, June 5-10, 2005, Kloster Irsee, Germany.

Ellis, RR and Wilson, DI and Johns, ML (2005) MRI and modelling studies of drying phenomena. In: 7th World Congress of Chemcal Engineering, July 10-14, 2005, Glasgow.

Martin, PJ and Wilson, DI (2004) Unusual wall slip in capillary flow of concentrated suspensions. In: XIVth International Congress on Rheology, August 22-27, 2004, Seoul, Korea.

Wilson, DI and Polley, GT (2004) The fouling limit in crude oil pre-heat train design. In: AIChE Spring Meeting 2004, 2004, New Orleans.

Barnes, EC and Hubbard, AM and Johns, ML and Wilson, DI (2004) Magnetic resonance imaging studies of biscuit dough extrusion. In: ICEF9 International Conference Engineering and Food, March 8-11, 2004, Montpelier.

Engmann, J and Peck, MC and Wilson, DI (2004) Experimental and theoretical investigation of wheat flour dough sheeting. In: XIVth International Congress on Rheology, August 22-27, 2004, Seoul, Korea.

See, HJ and Wilson, DI and Vassiliadis, VS and Parks-, GT (2004) Design of reverse osmosis (RO) water treatment networks subject to fouling. In: International Conference on Scaling and Corrosion in Water and Wastewater Systems, MAR 25-27, 2003, Cranfield, ENGLAND.

Barnes, EC and Barker, DB and Johns, ML and Wilson, DI (2004) In-situ imaging of soft solids undergoing ram extrusion: rheo-NMR of capillary rheometry. In: XIVth International Congress on Rheology, August 22-27, 2004, Seoul, Korea.

Chew, YMJ and Paterson, WR and Wilson, DI (2004) Dynamic gauging for measuring thickness and mechanical properties of soft solid deposit layers. In: ICEF9 International Conference Engineering and Food, March 8-11, 2004, Montpelier.

Chew, YMJ and Tuladhar, TR and Paterson, WR and Wilson, DI (2004) Dynamic gauging: a new technique for studying soft fouling layers in situ. In: The Membrane Academia Industry Network Conference, May 19-20, 2004, Cranfield University.

Hindmarsh, JP and Johns, ML and Wilson, DI (2004) Imaging the freezing of droplet of emulsions using MRI. In: ICEF9 International Conference Engineering and Food, March 8-11, 2004, Montpelier.

Barker, DB and Wilson, DI (2004) Temperature-dependent rheology of a highly-filled suspension as it is cooled to solidification. In: XIVth International Congress on Rheology, August 22-27, 2004, Seoul, Korea.

Yeap, BL and Wilson, DI and Polley, GT and Pugh, SJ (2003) Retrofitting Crude Oil Refinery Heat Exchanger Networks to Minimise Fouling While Maximising Heat Recovery. In: Heat Exchanger Fouling and Cleaning: Fundamentals and Applications, May 18-22, 2003, Santa Fe.

Chew, YMJ and Cardoso, SSS and Paterson, WR and Wilson, DI (2003) Understanding and Quantifying Cleaning Processes Using Fluid Dynamic Gauging. In: Heat Exchanger Fouling and Cleaning: Fundamentals and Applications, May 18-22, 2003, Santa Fe.

Russell, BD and Lasenby, J and Blackburn, S and Wilson, DI (2003) Signal processing for on-line control of paste extrusion. In: AIChE 2003 Annual Meeting, November 16-21, 2003, San Francisco.

Wilson, DI (2003) Challenges in Cleaning: Recent Developments and Future Prospects. In: Heat Exchanger Fouling and Cleaning: Fundamentals and Applications, May 18-22, 2003, Santa Fe.

Hindmarsh, JP and Johns, ML and Wilson, DI (2003) Imaging the freezing of droplets using MRI. In: AIChE 2003 Annual Meeting, November 16-21, 2003, San Francisco.

Martin, PJ and Wilson, DI and Carpenter, K (2002) Mechanics of paste flow in radial screen extruders. In: 4th World Congress on Particle Technology (WCPT4), JUL 21-25, 2002, SYDNEY, AUSTRALIA.

Russell, BD and Wilson, DI and Lasenby, J and Blackburn, S (2002) On-line monitoring of pastes undergoing extrusion. In: 4th World Congress on Particle Technology (WCPT4), JUL 21-25, 2002, SYDNEY, AUSTRALIA.

Laurent, BFC and Bridgwater, J and Hiseman, MJP and Wilson, DI and Merrifield, DR and North, N (2002) Granulation in a planetary mixer. In: 4th World Congress on Particle Technology (WCPT4), JUL 21-25, 2002, SYDNEY, AUSTRALIA.

Chew, YMJ and Cardoso, SSS and Paterson, WR and Tuladhar, TR and Wilson, DI (2002) Computational fluid dynamics applied to dynamic gauging. In: CHEMECA 2002, September 29 to October 3, 2002, Christchurch, New Zealand.

Fitzgerald, AM and Barnes, OJ and Smart, I and Wilson, DI (2002) Coring : deposition of palm oil fats in distribution lines. In: Fouling, Cleaning and Disinfecting in Food Processing, April 3-5, 2002, Cambridge, England.

Tuladhar, TR and Chew, YMJ and Cardoso, SSS and Paterson, WR and Wilson, DI (2002) Dynamic gauging investigations of cleaning-in-place of whey protein soils on solid surfaces. In: Fouling, Cleaning and Disinfecting in Food Processing, April 3-5, 2002, Cambridge, England.

Smaïli, F and Vassiliadis, VS and Wilson, DI (2001) Mitigation of fouling in refinery heat exchanger networks by optimal management of cleaning. In: 2nd International Conference on Petroleum Phase Behavior and Fouling, AUG 27-31, 2000, COPENHAGEN, DENMARK.

Zheng, L and Russell, AB and Wilson, DI (2001) Influence of crystallisation on heat transfer at a scraped surface. In: 6th World Congress of Chemical Engineering, September 23-28, 2001, Melbourne, Australia.

Tuladhar, TR and Paterson, WR and Wilson, DI (2001) Use of a novel fluid dynamic gauging technique in swelling studies of whey protein deposits during cleaning. In: 6th World Congress of Chemical Engineering, September 23-28, 2001, Melbourne, Australia.

Martin, PJ and Wilson, DI and Challis, K (2001) Extrusion of paste through non-axially symmetric systems. In: 6th World Congress of Chemical Engineering, September 23-28, 2001, Melbourne, Australia.

Cheyne, A and Wilson, DI and Gedney, S and Barnes, OJ and Scriven, F (2001) Shear-induced microstructural changes in starchy materials. In: 6th World Congress of Chemical Engineering, September 23-28, 2001, Melbourne, Australia.

Wilson, CJ and Lockyer, PR and Wilson, DI (2001) Modelling of crystalline scale removal. In: International Conference on Mitigation of Heat Exchanger Fouling and Its Economic and Environmental Implications, JUL, 1999, BANFF, CANADA.

Yuan, WX and Burbidge, AS and Blackburn, S and Fisher, KA and Langston, PA and Wilson, DI (2001) A micro-scale model of paste flow in the ram extrusion process. In: 6th World Congress of Chemical Engineering, September 23-28, 2001, Melbourne, Australia.

Smaïli, F and Vassiliadis, VS and Wilson, DI (2001) Scheduling of heat exchanger cleaning in refinery heat exchanger networks. In: International Conference on Mitigation of Heat Exchanger Fouling and Its Economic and Environmental Implications, JUL, 1999, BANFF, CANADA.

Smaïli, F and Vassiliadis, VS and Wilson, DI (2000) The Environmental Impact of Fouling : Minimising Energy Consumption in Large Heat Exchanger Networks. In: CHEMECA 2000, July 9-12, 2000, Perth, Australia.

Tuladhar, TR and Paterson, WR and Wilson, DI (2000) Use of Dynamic Gauging – a Soft Film Thickness Sensor - to probe Cleaning-in-Place of Whey Protein Deposits. In: CHEMECA 2000, July 9-12, 2000, Perth, Australia.

Rough, SL and Bridgwater, J and Wilson, DI (2000) Modelling of Paste Extrusion Subject to Liquid Phase Redistribution. In: CHEMECA 2000, July 9-12, 2000, Perth, Australia.

See, HJ and Vassiliadis, VS and Wilson, DI (2000) Simultaneous synthesis of reverse osmosis membrane networks and schedules under ageing and fouling conditions. In: 8th World Filtration Congress, April 3-7, 2000, Brighton, England.

See, HJ and Vassiliadis, VS and Wilson, DI (2000) Integrated Design of Reverse Osmosis Membrane Water Treatment Processes. In: CHEMECA 2000, July 9-12, 2000, Perth, Australia.

See, HJ and Vassiliadis, VS and Wilson, DI (1999) Optimal regeneration scheduling for reverse osmosis membranes in water and wastewater treatment. In: CCWI'99. Water Industry Systems: Modelling and Optimization Applications Vol 2, September, Exeter, England.

Amarasinghe, ADUS and Wilson, DI (1997) Statistical Analysis of Pressure Fluctuations in Paste Extrusion. In: IChemE Research Event, 1997, Nottingham, England.

Zhang, G and Wilson, DI and Watkinson, AP (1997) Fouling of a Cyclic Olefin on Plain and Enhanced Surfaces. In: AiChE Symposium Series 295,89, 1993.

Hiseman, MJP and Bridgwater, J and Wilson, DI (1997) Positron emission particle tracking studies of powder mixing in a planetary mixer. In: Engineering Foundation Conf. on Control of Particulate Processes, April 5-9,1997, Delft, The Netherlands.

Gillham, CR and Wilson, DI and Belmar-Beiny, MT and Fryer, PJ (1997) Overall Mitigation of Fouling: A Better Understanding of the Events during Cleaning of Food Process Plant. In: Understanding Heat Exchanger Fouling and its Mitigation, May 11-16,1997, Castelvecchio Pascoli (near Barga), Italy.

Wilson, DI and Vassiliadis, VS (1997) Mitigation of Refinery Fouling by Management of Cleaning. In: Understanding Heat Exchanger Fouling and its Mitigation, May 11-16,1997, Castelvecchio Pascoli (near Barga), Italy.

Wilson, DI and Condron, PI and Garrett, SG (1997) Case Studies in Data Reconciliation for Fouling Management. In: Heat Transfer 97 (AiChE Symposium Series), 1997, Baltimore.

Hiseman, MJP and Bridgwater, J and Wilson, DI (1996) Positron Emission Particle Tracking Studies of Granulation in a Planetary Mixer. In: European Conference on Particle Technology, Prague, Czech.

Crocker, MR and Fairhurst, PG and Wilson, DI (1996) Model Experiments of Crystalline Scale Removal’. In: 1996 IChemE Research Event, 1996, Leeds.

Wilson, DI and Watkinson, AP (1995) Model Experiments of Autoxidation Fouling. In: IChemE Research Event, 1995, Edinburgh, Scotland.