skip to primary navigationskip to content
 

Publications

Listed below are most publications produced by members of the P3 Group. Links are provided in some cases where documents are available online as pdf documents. Group members note that all these papers are kept in the filing cabinet, please see Tao Wang, the group librarian and webmaster.

Dissertations
Journal and Conference Papers/Posters

 


Dissertations

PLEASE READ COPYRIGHT INFORMATION.

Dr. Shantha Amarasinghe Interpretation of paste extrusion data 1998
Dr. Martin Bardsley Facets in the production of catalyst support by paste extrusion 2000
Dr. Dean Barker Thermal processing of highly filled suspensions 2008
Dr. Eloise Barnes Nuclear magnetic resonance studies of soft-solid extrusion 2005
Dr. Anthony Bates Radial flow of pastes (University of Birmingham) 1995
Dr. John Chew Development of Fluid Dynamic Gauging for Cleaning Studies 2004
Dr. Alex Cheyne Extrusion behaviour of starch-based food pastes 2001
Dr. Amanda Dawson-Tubb High shear continuous mixing - structure and rheology of a batter 2004
Dr. Annette Domanti Surface Fracture in Paste Extrusion 1998
Dr. Richard Ellis MRI and modelling studies of drying phenomena 2009
Dr. Andrea Fitzgerald Crystallisation and deposition behaviour of palm oil fractions 2002
Dr. Sarah Forrest Agglomeration and flow transitions 2004
Dr. Charles Gillham Enhanced cleaning od surfaces fouled by whey proteins 1997
Dr. Tong Gu Development of fluid dynamic gauging for annular geometries 2009
Dr. Marios Hadjiandreou Mathematical modelling of HIV infection: an investigation of treatment strategies 2008
Dr. Rowan Hooper Development of techniques for the study of protein systems 2006
Dr. Daniel Horrobin Theoretical Aspects of Paste Extrusion 1999
Dr. Edward Ishiyama Modelling crude oil preheat networks subject to fouling 2009
Dr. Jim Jones Granular flow in ploughshare mixers 1998
Dr. Basil Lam Convective heat transfer in rotary kilns 2007
Dr. Bruno Laurent Powder flow patterns in a horizontal mixer using positron emission particle tracking 1998
Dr. Su Ling Liaw Shear-Induced Structures in a Commercial Surfactant-Based System 2004
Dr. Sing-Yong Lim Granular flow in an inclined rotating cylinder 2002
Dr. Peter Martin Mechanics of paste flow in radial screen extruders 2002
Dr. Salvatore Mascia Rheology and processing of pharmaceutical pastes 2008
Dr. Ruben Mercade-Prieto Dissolution mechanisms of protein gels in alkali 2007
Dr. Milan Patel Theoretical aspects of paste formulation for extrusion 2008
Dr. Martin Peck Roller Extrusion of Pastes 2003
Dr. Bruce Russell Signal Processing of Extrusion Data 2004
Dr. Phanida Saikhwan Cleaning behaviour of some polymeric and proteinaceous fouling layers 2008
Dr. Ian Somasundram Wick debinding of ceramic parts 2009
Dr. Richard Spurling Granular Flow in an Inclined Rotating Cylinder: Steady State and Transients 2001
Dr. Rowan Stewart Convection and mixing of granular material stirred by a flat blade 2001
Dr. James Third Modelling particle motion within rotating cylinders 2009
Dr. Tri Tuladhar Development of a novel sensor for cleaning studies 2001
Dr. Mark Williamson Design of an improved baking oven using computational fluid dynamics modelling 2008
Dr. Boon Lin Yeap Designing heat exchanger networks to mitigate fouling 2003

 


Journal & Conference Papers

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A

Amarasinghe, A.D.U.S. and Wilson, D.I. (1997). Statistical analysis of pressure fluctuations in paste extrusion. In IChemE 1997 Jubilee Research Event, Nottingham, UK, April 8-9, vol. 1, pp. 529-532.
[Conference paper or poster]

Amarasinghe, A.D.U.S. and Wilson, D.I. (1998). Interpretation of paste extrusion data. Trans. IChemE, Part A, Chemical Engineering Research & Design, 76, 3-8.
[Journal paper]

Amarasinghe, A.D.U.S. and Wilson, I. (1999). On-line monitoring of ceramic paste extrusion. Journal of the American Ceramic Society, 82 (9), 2305-2312.
[Journal paper]

Andrews, J.R.G. and Scott, D.M. (2000). Similarity solutions for multicomponent nonlinear diffusion. Chemical Engineering Science, 55, 1033-1037 .
[Journal paper] [External link]

Augustin, W., Chew, Y.M.J., Gordon, P.W., Lister, V.Y., Mayer, M., Paterson, B.R., Peralta, J.-M., Scholl, S. and Wilson D.I. (2012). Messung von weichen foulingschichten auf festen und porösen oberflchen mit dem fluid dynamic gauging. Chemie Ingenieur Technik, 84, 46-53.
[Journal paper] [External link]

B

Barker, D.A. and Wilson, D.I. (2005). Measurement of the Thermophysical Properties of a Thermoplastic Ceramic Paste Across its Solidification Range Using Power-Compensated Differential Scanning Calorimeter. Journal of the American Ceramic Society, 88 (11), 3116-3124.
[Journal paper]

Barker, D.A. and Wilson, D.I. (2005). Temperature profiles in a controlled-stress parallel plate rheometer. Rheologica Acta, 46, 23-31.
[Journal paper]

Barker, D.A. and Wilson, D.I. (2008). Rheology of a thermoplastic paste through the mushy state transition. Chemical Engineering Science, 63, 1438-1448.
[Journal paper]

Barnes, E.C. (2001). Pelletiser fundamentals. Part IIB Research Project, Department of Chemical Engineering, University of Cambridge.
[Dissertation]

Barnes, E.C., Hollingsworth, K.G., Wilson, D.I. and Johns, M.L. (2003). Magnetic resonance studies of liquid-soft solid mixing by extrusion. Trans. IChemE, Part A, Chem.Eng.Res.Des., 82, 1360-1366.
[Journal paper]

Barrett, A., Bridgwater, J., Burbidge, A.S. and Hargreaves, M. (1997). Flow of pastes in bent tubes. Journal of the European Ceramic Society, 17, 233-238.
[Journal paper] [External link]

Bates, A.J.D. and Bridgwater, J. (1993). The flow of paste in complex geometries. In The 1993 IChemE Research Event, Birmingham, UK, January 6-7, 1993, vol. 1, pp. 378-380.
[Conference paper or poster]

Bates, A.J.D. and Bridgwater, J. (1994). Applications of a new rheological model to the problems of ceramic injection moulding. In Eighth Cimtec (World Ceramics Congress / Forum on New Materials), Florence, Italy, June 28-July 4, 1994, Paper B7: P10.
[Conference paper or poster]

Bates, A.J.D. and Bridgwater, J. (1994). Modelling of non-uniform radial paste flow. In The 1994 IChemE Research Event, London, UK, January 5-6, 1994, vol. 2, pp. 725-727.
[Conference paper or poster]

Bates, A.J.D. and Bridgwater, J. (2000). The radial flow of pastes and gels. Chemical Engineering Science, 55, 3003-3012.
[Journal paper] [External link]

Bayfield, M., Haggett, J.A., Williamson, M.J., Wilson, D.I. and Zargar, A. (1998). Liquid phase migration in the extrusion of icing sugar pastes. Trans. IChemE, Part C, Food and Bioproducts Processing, 76, 39-46.
[Journal paper]

Benbow, J.J. ( 1971). The dependence of output rate on die shape during catalyst extrusion. Chemical Engineering Science, 26, 1467-1473.
[Journal paper]

Benbow, J.J. (1990). New aspects of die design for paste extrusion. In Rheology of Food, Pharmaceutical and Biological Materials with General Rheology, proceedings of the Annual Meeting of the British Society of Rheology, Coventry, UK, September 12-15, 1989, ed. R. E. Carter, pp. 219-230. Elsevier Applied Science, London, UK.
[Conference paper or poster]

Benbow, J. J. (1993). Ceramic paste extrusion. In Processing, Properties and Applications of Metallic and Ceramic Materials, proceedings of the International Conference on the Processing, Properties and Applications of Metallic and Ceramic Materials, Birmingham, UK, September 7-10, 1992, eds. M. H. Loretto and C. J. Beevers, vol. 1, pp. 91-96. Engineering Materials Advisory Services, Warley, U.K.
[Conference paper or poster]

Benbow, J.J., Blackburn, S., Lawson, T.A., Oxley, E.W. and Bridgwater, J. (1992). The causes and prevention of defects during ceramic forming. In Special Ceramics 9 (British Ceramic Proceedings, No.49 -Meeting of the Basic Science Section of the Institute of Ceramics at Imperial College, London, December 18-20, 1990), eds. unknown, pp. 67-81. The Institute of Ceramics, Stoke-on-Trent, U.K.
[Conference paper or poster]

Benbow, J.J. and Bridgwater, J. (1987). Measurement of paste yield by cone penetration. Chemical Engineering Science, 42 (4), 915-919.
[Journal paper]

Benbow, J. J. and Bridgwater, J. (1987). The influence of formulation on extrudate structure and strength. Chemical Engineering Science, 42 (4), 753-766.
[Journal paper]

Benbow, J. J. and Bridgwater, J. (1987). The role of frictional forces in paste extrusion. In Tribology in Particulate Technology, eds. B. J. Briscoe and M. J. Adams, pp. 80-90. IOP, Bristol, UK.
[Book or chapter therein]

Benbow, J.J. and Bridgwater, J. (1988). Recent result on the rheology of particulate pastes. In Progress and Trends in Rheology II (proceedings of the Second Conference of European Rheologists, Prague, Czechoslovakia, June 17-20, 1986), eds. H. Giesekus and M. F. Hibberd. Supplement to Rheologica Acta, 26, 352-354.
[Conference paper or poster]

Benbow, J.J. and Bridgwater, J. (1993). The cutting of paste extrudates. Chemical Engineering Science, 48 (17), 3088-3091.
[Journal paper]

Benbow, J.J. and Bridgwater, J. (1993). Paste flow and extrusion. Clarendon Press, Oxford, UK (in Department library).
[Book or chapter therein]

Benbow, J.J., Jazayeri, S.H. and Bridgwater, J. (1988). Ceramic extrusion mechanics: the effects of paste formulation and liquid phase rheology on die-flow resistance. In Ceramic Powder Science II (Ceramic Transactions, vol. 1, Proceedings of the 1st International Conference on Ceramic Powder Processing Science, Orlando, Florida, November 1-4, 1987), eds. G. L. Messing, E. R. Fuller and H. Hausner, part B, pp. 624-634. American Ceramic Society, Westerville, Ohio, U.S.A.
[Conference paper or poster]

Benbow, J.J., Jazayeri, S.H. and Bridgwater, J. (1989). New aspects of die design for ceramic extrusion. In Ceramic Powder Processing Science (Proceedings of the Second International Conference, Berchtesgaden, Germany, Oct 12-141988), eds H. Hausner, G. L. Messing and S. Hirano, pp. 581-587. Deutsche Keramische Gesellschaft, Cologne, Germany.
[Conference paper or poster]

Benbow, J.J., Jazayeri, S. H. and Bridgwater, J. (1991). Prediction of the extrusion of ceramic pastes through conical dies. In Proceedings of Euro-ceramics II (second European Ceramic Society conference), Augsburg, Germany, September 11-14, 1991, eds. G. Ziegler and H. Hausner. Deutsche Keramische Gesellschaft, Cologne, Germany.
[Conference paper or poster]

Benbow, J.J., Jazayeri, S.H. and Bridgwater, J. (1991). The flow of pastes through dies of complicated geometry. Powder Technology, 65, 393-401.
[Journal paper]

Benbow, J.J., Lawson, T.A., Oxley, E.W. and Bridgwater, J. (1989). Prediction of paste extrusion pressure. Ceramic Bulletin, 68 (10), 1821-1824.
[Journal paper]

Benbow, J.J., Lawson, T.A., Oxley, E.W. and Bridgwater, J. (1990). The influence of liquid phase rheology on particulate paste extrusion. In Third European Rheology Conference and Golden Jubilee Meeting of the British Society of Rheology, Edinburgh, UK, September 3-7, 1990, ed. D. R. Oliver, pp. 50-53. Elsevier Applied Science, London, UK.
[Conference paper or poster]

Benbow, J.J., Ouchiyama, N. and Bridgwater, J. (1987). On the prediction of extrudate pore structure from particle size. Chemical Engineering Communications, 62, 203-220.
[Journal paper]

Benbow, J.J., Oxley, E.W. and Bridgwater, J. (1987). The extrusion mechanics of pastes - the influence of paste formulation on extrusion parameters. Chemical Engineering Science, 42 (9), 2151-2162.
[Journal paper]

Blackburn, S. and Wilson, D.I. (2008). Shaping ceramics by plastic processing. Journal of the European Ceramic Society, 28, 1341-1351.
[Journal paper]

Bode, K., Hooper, R.J., Paterson, W.R., Wilson, D.I., Augustin, W. and Scholl, S. (2007). Pulsed flow cleaning of whey protein fouling layers. Heat Transfer Engineering, 28 (3), 202-209.
[Journal paper]

Broadbent, C.J., Bridgwater, J. and Parker, D.J. (1995). The effect of fill level on powder mixer performances using a positron camera. Chemical Engineering Journal, 56, 119-125.
[Journal paper]

Broadbent, C.J., Bridgwater, J., Parker, D.J., Keningley, S.T. and Knight, P. (1994). A phenomenological study of a batch mixer using a positron camera. Powder Technology, 76, 317-329.
[Journal paper]

Bridgwater, J. (1989). Paste extrusion-an overview. In Recent Advances in Chemical Engineering (Proceedings of the International Conference on Advances in Chemical Engineering, Kanpur, India, January 4-6, 1989), eds. D. N. Saraf and D. Kunzru, pp. 3-13. Tata McGraw-Hill, New Delhi, India.
[Conference paper or poster]

Bridgwater, J. (1990). Breakage of ceramic extrudates: the effect of equipment design. In 2nd World Congress Particle Technology, Kyoto, Japan, September 19-22, 1990, part 2, pp. 423-429. Society of Powder Technology, Japan.
[Conference paper or poster]

Bridgwater, J. (1991). Extruder design and selection for processing duties. In Polymer Processing, Structure and Properties (conference proceedings, Leeds, UK, May 15-16, 1991), pp. 3.1-3.31. R&D Clearing House, London, UK.
[Conference paper or poster]

Bridgwater, J. (1993). Ceramic forming-the effect of material components and processing on properties. Materials & Design, 14 (1), 15-18.
[Journal paper]

Bridgwater, J. (1993). Ceramic forming-the effect of material components and processing on properties. In Processing, Properties and Applications of Metallic and Ceramic Materials (proceedings of the International Conference on the Processing, Properties and Applications of Metallic and Ceramic Materials, Birmingham, UK, September 7-10, 1992), eds. M. H. Loretto and C. I. Beevers, vol. 1, pp. 51-60. Engineering Materials Advisory Services, Warley, U.K.
[Conference paper or poster]

Bridgwater J. (1993). Mixing and Segregation Mechanisms in Particle Flow. Chapter 6 in Granular Matter, an Interdisciplinary Approach, Springer-Verlag, 161-193, 1993.
[Book or chapter therein]

Bridgwater, J. (1995). Particle technology. Chemical Engineering Science, 50 (24), 4081-4089.
[Journal paper]

Bridgwater, J. (1995). Powder mixing. Process Tomography, Principles, Techniques and Applications, eds. R.A. Williams and M.S. Beck, 420-431, 1995.
[Book or chapter therein]

Bridgwater, J. (1995). Mixing. Chapter 10 in Powder Technology and Pharmaceutical Processes, Elsevier Science, eds. D. Chulia, M. Deleuil and Y. Pourcelot, Chapter 10, 347-357, 1995.
[Book or chapter therein]

Bridgwater, J. (1996). Paste rheology. In Solid-Solid Interactions (Proceedings of the First Royal Society-Unilever Indo-UK Forum in Materials Science and Engineering, London, UK, 1994), eds. M. J. Adams, S. K. Biswas and B. J. Briscoe, pp. 374-383. Imperial College Press, London, UK.
[Conference paper or poster]

Bridgwater, J. (1999). Segregation mechanisms in condensed granular flow. In Proceedings IUMTAM symposium on Segregation in Granular Flows, New Jersey, USA, 5-10 June 1999, eds. A.D. Rosato and D.L. Blackmore, published by Kluwer.
[Conference paper or poster]

Bridgwater, J. (2003). The dynamics of granular materials - towards grasping the fundamentals. Granular Matter, 4, 175-181.
[Journal paper]

Bridgwater, J. (2003). Powder mixers. What is really going on inside? The 4th International Conference for Conveying and Handling of Particulate Solids, Budapest, Hungary, May 2003, Proceedings, vol. 2, eds. H. Kalman and J Gyenis.
[Conference paper or poster]

Bridgwater J., Broadbent C.J. and Parker D.J. (1993). Study of the influence of a blade speed on the performance of a powder mixer using positron emission particle tracking. Trans. IChemE, 71, 673-681.
[Journal paper]

Bridgwater, J., Forrest, S. and Parker, D.J. (2004). PEPT for agglomeration? Powder Technology, 140, 187-193.
[Journal paper] [External link]

Burbidge, A.S. and Bridgwater, J. (1992). Production of ceramics by extrusion: design of single screw extrusion equipment. In The 1992 IChemE Research Event, Manchester, UK, January, 1992, pp. 634- 636.
[Conference paper or poster]

Burbidge, A.S. and Bridgwater, J. (1995). The single screw extrusion of pastes. Chemical Engineering Science, 50 (16), 2531-2543.
[Journal paper]

Burbidge, A.S. and Bridgwater, J. (1996). Flow visualisation for paste extrusion. In The 1996 IChemE Research Event / Second European Conference for Young Researchers in Chemical Engineering, Leeds, UK, April 2-3, 1996, vol. 1, pp. 358-360.
[Conference paper or poster]

Burbidge, A.S. and Bridgwater, J. (1996). Recent developments in the study of paste extrusion. In The IChemE Fifth Research Symposium, QUB Belfast, Belfast, UK, March 29, 1996, pp. 166-172.
[Conference paper or poster]

Burbidge, A.S. and Bridgwater, J. (1999). Unsteady state planar divergent flow of extrusion pastes. Powder Technology, 106, 119-131.
[Journal paper] [External link]

Burbidge, A.S., Bridgwater, J. and Saracevic, Z (1995). Liquid migration in paste extrusion. Trans. IChemE, Part A, Chemical Engineering Research & Design, 73, 810-816.
[Journal paper]

Burbidge, A.S., Feasey, I., Wilson, A. and Bridgwater, J. (1998). Liquid phase migration in extrusion pastes. In World Congress on Particle Technology 3, Brighton, UK, Ju1y 6-9, 1998, paper 112. Institution of Chemical Engineers, Rugby, UK.
[Conference paper or poster]

C

Celnik, M.S., Patel, M.J., Pore, M., Scott, D.M. and Wilson, D.I. (2006). Modelling laminar pulsed flow for the enhancement of cleaning. Chemical Engineering Science, 61 (6), 2079-2084.
[Journal paper] [External link]

Chen, Y., Burbidge, A.S. and Bridgwater, J. (1997). Effect of carbohydrate on the rheological parameters of paste extrusion. Journal of the American Ceramic Society, 80 (7), 1841-1850.
[Journal paper]

Chesterton, A.K.S., Meza, B.E., Moggridge, G.D., Sadd, P.A. and Wilson, D.I. (2011). Rheological characterisation of cake batters generated by planetary mixing: Elastic versus viscous effects. Journal of Food Engineering, 105, 332-342.
[Journal paper] [External link]

Chesterton, A.K.S., Moggridge, G.D., Sadd, P.A. and Wilson, D.I. (2011). Modelling of shear rate distribution in two planetary mixtures for studying development of cake batter structure. Journal of Food Engineering, 105, 343-350.
[Journal paper] [External link]

Chesterton, A.K.S., Sadd, P.A., Meza, B.E., Moggridge, G. and Wilson, D.I. (2011). Impact of flour heat treatment on cake batters. 11th International Congress on Engineering and Food, Athens, Greece, May 22-26, 2011.
[Conference paper or poster]

Chew, J.Y.M., Cardoso, S.S.S., Paterson, W.R., Tuladhar, T.R. and Wilson D.I. (2002). Computational fluid dynamics applied to dynamic gauging. In Proc. CHEMECA and 9th Asian Pacific Confederation of Chemical Engineering, Christchurch, New Zealand.
[Conference paper or poster]

Chew, J.Y.M., Cardoso, S.S.S., Paterson, W.R. and Wilson D.I. (2003). Understanding and quantifying cleaning processes using fluid dynamic gauging. In Proc. Heat Exchanger Fouling and Cleaning: Fundamentals and Applications, Santa Fe, New Mexico, USA.
[Conference paper or poster] [External link]

Chew, J.Y.M., Höfling, V., Augustin, W., Paterson, W.R. and Wilson, D.I. (2004). Dynamic gauging for measuring the thickness and mechanical properties of soft solid deposits. In Proc. International Congress on Engineering and Food, Montpelier, France, Paper #560.
[Conference paper or poster]

Chew, J.Y.M., Cardoso, S.S.S., Paterson, W.R. and Wilson D.I. (2004). CFD studies of dynamic gauging. Chemical Engineering Science, 59 (16), 3381-3398.
[Journal paper]

Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2004). Dynamic gauging for measuring the strength of soft deposits. Journal of Food Engineering, 65 (2), 175-187.
[Journal paper]

Chew, J.Y.M., Höfling, V., Augustin, W., Paterson, W.R. and Wilson, D.I. (2004). Dynamische Messung der Dicke und der Mechanischen Eigenschaften von Weichen Ablagerungen. Chemie Ingenieur Technik, 76 (7), 1021-1025.
[Journal paper]

Chew, J.Y.M., Tuladhar, T.R., Paterson, W.R. and Wilson, D.I. (2004). Dynamic gauging: a new technique for studying soft fouling layers in situ. CIWEM Journal, In press.
[Journal paper]

Chew, J.Y.M., Höfling, V., Augustin, W., Paterson, W.R. and Wilson, D.I. (2004). A method for measuring the strength of scale deposits on heat transfer surfaces. Developments in Chemical and Mineral Processing, 13 (1/2), 21.
[Journal paper]

Chew, J.Y.M., Tonneijk, S.J., Gould, A.R., Paterson, W.R. and Wilson, D.I. (2005). Solvent-based cleaning of emulsion polymerization reactors. In 6th International Conference on Heat Exchanger Fouling and Cleaning - Challenges and Opportunities, Kloster-Irsee, Germany.
[Conference paper or poster]

Chew, J.Y.M., Tonneijk, S.J., Patterson, W.R. and Wilson, D.I. (2006). Mechanisms in the Solvent Cleaning of Emulsion Polymerization Reactor Surfaces. Ind. Eng. Chem. Res., 44, 4605-4616.
[Journal paper] [External link]

Chew, J.Y.M., Tonneijk, S.J., Patterson, W.R. and Wilson, D.I. (2006). Solvent-based cleaning of emulsion polymerization reactors. Chemical Engineering Journal., 117, 61-69.
[Journal paper]

Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2006). Investigating the fouling and cleaning behaviour of thin polymer films using fluid dynamic gauging. , .
[Conference paper or poster]

Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2007). Fluid dynamic gauging: A new tool to study deposition on porous surfaces. Journal of Membrane Science
[Journal paper] [External link]

Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2007). Fluid dynamic gauging: A new technique for studying membrane fouling. Water Science & Technology: Water Supply, 7, 175-184.
[Journal paper]

Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2010). Application of fluid dynamic gauging and optical imaging to membrane fouling. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Cheyne, A., Barnes, J. and Wilson, D.I. (2005). Extrusion behaviour of cohesive potato starch pastes: I. Rheological characterisation. Journal of Food Engineering, 66, 1-12
[Journal paper] [External link]

Cheyne, A., Barnes, J., Gedney, S. and Wilson, D.I. (2004). Extrusion behaviour of cohesive potato starch pastes: II. Microstructure-process interactions. Journal of Food Engineering, 66, 13-24.
[Journal paper] [External link]

Choong, T.S.Y., Paterson, W.R. and Scott, D.M. (2002). Development of novel algorithm features in the modeling of cyclic processes. Computers and Chemical Engineering, 26, 95-112.
[Journal paper] [External link]

Chou, S., Sydow, K., Martin, P.J., Bridgwater, J. and Wilson, D.I. (2003). Stress relaxation in the extrusion of pastes. Journal of the European Ceramic Society, 23, 637-646.
[Journal paper] [External link]

Cleary, P.W., Laurent, B.F.C. and Bridgwater, J. (2002). DEM prediction of flow patterns and mixing rates in a ploughshare mixer. World Congress in Particle Technology, Sydney, July 2002, Paper 715.
[Conference paper or poster]

Coletti, F., Ishiyama, E.M., Paterson, W.R., Wilson, D.I. and Macchietto, S. (2010). Impact of deposit aging and surface roughness on thermal fouling: Distributed model. AIChE Journal, 56(12), 3257-3273.
[Journal paper] [External link]

D

Davidson, J.F., Scott, D.M., Bird, P.A., Herbert, O., Powell, A.A. and Ramsey, H.V.M. (2000). Granular motion in a rotary kiln: the transition from avalanching to rolling, KONA, Powder and Particle, No. 18, 149-156.
[Conference paper or poster]

Davies, P.R., Norton, M.J.S., Wilson, D.I., Davidson, J.F. and Scott, D.M. (2010). Gas flow in rotary klins. Particuology, 8, 613-616.
[Journal paper] [External link]

Di Pretoro, G., Zema, L., Gazzaniga, A., Rough, S.L. and Wilson, D.I. (2010). Extrusion-spheronisation of highly loaded 5-ASA multiparticulate dosage forms. International Journal of Pharmaceutics, 402, 153-164.
[Journal paper] [External link]

Domanti, A.T.J. and Bridgwater, J. (1996). Extrusion induced defects. In The 1996 IChemE Research Event / Second European Conference for Young Researchers in Chemical Engineering, Leeds, UK, April 2-3, 1996, vol. 1, pp. 106-108.
[Conference paper or poster]

Domanti, A.T.J. and Bridgwater, J. (1997). Surface fracture in paste extrusion. In The First European Congress on Chemical Engineering (in occasion of The Third Italian Conference on Chemical and Process Engineering), Florence, Italy, May 4-7, 1997, vol. 3, pp. 2085-2088.
[Conference paper or poster]

Domanti, A.T.J. and Bridgwater, J. (2000). Surface fracture in axisymmetric paste extrusion. Trans. IChemE, 78 (A), 68-78.
[Journal paper]

Domanti, A.T.J. and Bridgwater, J. (2004). On the origin of paste fracture. Industrial and Engineering Chemistry Research, 43, 3750-3757.
[Journal paper] [External link]

Domanti, A.T.J., Horrobin, D.J. and Bridgwater, J. (2002). An investigation of fracture criteria for predicting surface fracture in paste extrusion. International Journal of Mechanical Sciences, 44, 1381-1410.
[Journal paper] [External link]

E

F

Forrest, S., Bridgwater, J., Mort, P.R. and Litster, J.D. (2001). Flow patterns in granulating systems. In 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September, 2001.
[Conference paper or poster]

Forrest, S., Bridgwater, J., Mort, P.R. and Litster, J. (2001). Flow patterns in granulating systems. Proc. 7th International Symposium on Agglomeration, Albi, France, 29-31 May, 2001.
[Conference paper or poster]

Forrest, S., Bridgwater, J., Mort, P.R., Litster, J. and Parker, D.J. (2003). Flow patterns in granulating systems. Powder Technology, 130, 91-96.
[Journal paper] [External link]

G

Goodson, M., Kraft, M., Forrest, S. and Bridgwater, J. (2004). A multi-dimensional population balance model for agglomeration. PARTEC 2004, Nuremberg, Germany, March 16-18, 2004.
[Conference paper or poster]

Gordon, P.W., Brooker, A.D.M., Chew, Y.M.J., Peralta, J.M., York, D.W. and Wilson, D.I. (2011). Using scanning fluid dynamic gauging to study the mechanisms and kinetics of enzyme based cleaning. 11th International Congress on Engineering and Food, Athens, Greece, May 22-26, 2011.
[Conference paper or poster]

Gordon, P.W., Brooker, A.D.M., Chew, Y.M.J., Wilson, D.I. and York, D.W. (2010). A scanning fluid dynamic gauging technique for probing surface layers. Measurement Science and Technology, 21, 1-10.
[Journal paper] [External link]

Gordon, P.W., Brooker, A.D.M., Chew, Y.M.J., Wilson, D.I. and York, D.W. (2010). Studies into the swelling of gelatine films using a scanning fluid dynamic gauge. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Gordon, P.W., Brooker, A.D.M., Chew, Y.M.J., Wilson, D.I. and York, D.W. (2010). Studies into the swelling of gelatine films using a scanning fluid dynamic gauge. Food and Bioproducts Processing, 88, 357-364.
[Journal paper] [External link]

Gu, T., Chew, Y.M.J., Paterson, W.R. and Wilson, D.I. (2009). Experimental and CFD studies of fluid dynamic gauging in duct flows. Chemical Engineering Science, 64, 219-227.
[Journal paper]

Gu, T., Chew, Y.M.J., Paterson, W.R. and Wilson, D.I. (2009). Experimental and CFD studies of fluid dynamic gauging in annular flows. AIChE Journal, 55(8), 1937-1947.
[Journal paper]

Gu, T., Albert, F., Augustin, W., Chew, Y.M.J., Paterson, W.R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D.I. (2011). Fluid dynamic gauging applied to annular test apparatuses for fouling and cleaning. Heat Transfer Engineering, 32(3-4), 342-351.
[Journal paper] [External link]

Gu, T., Albert, F., Augustin, W., Chew, Y.M.J., Mayer, M., Paterson, W.R., Scholl, S., Sheikh, I., Wang, K. and Wilson, D.I. (2011). Application of fluid dynamic gauging to annular test apparatuses for studying fouling and cleaning. Thermal and Fluid Science, 35, 509-520.
[Journal paper] [External link]

Gwie, C.G., Griffiths, R.J., Cooney, D.T., Johns, M.L. and Wilson, D.I. (2006). Microstructures formed by spray freezing of food fats. JAOCS, 83, 1053-1062.
[Journal paper]

H

Hadjiandreou, M.M., Conejeros, R. and Wilson, D.I. (2009). Long-term HIV dynamics subject to continuous therapy and structured treatment interruptions. Chemical Engineering Science, 64, 1600-1617.
[Journal paper]

Hadjiandreou, M.M., Conejeros, R. and Wilson, D.I. (2009). Planning of patient-specific drug-specific optimal HIV strategies. Chemical Engineering Science, 64, 4024-4039.
[Journal paper]

Hiseman M., Bridgwater J. and Wilson D.I. (1996). Positron emission particle tracking studies of granulation in a planetary mixer. IChemE Research Event, Leeds, England, April 2-3, 1996.
[Conference paper or poster]

Hiseman, M.J.P., Laurent, B.F.C., Bridgwater, J., Wilson, D.I., Parker, D.J., North, N. and Merrifield, D.R. (2002). Granular flow in a planetary mixer. Trans. IChemE, Part A, Chemical Engineering Research and Design, 80, 432-440.
[Journal paper]

Hooper, R.J., Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2006). Development of a novel micro-scale technique for monitoring food proteins undergoing cleaning. In Proc. Fouling, Cleaning and Disinfectant in Food Processing, Department of Chemical Engineering, Cambridge, UK.
[Journal paper]

Hooper, R.J., Liu, W., Fryer, P.J., Paterson, W.R., Wilson, D.I. and Zhang, Z. (2006). Comparative studies of fluid dynamic gauging and a micromanipulation probe for strength measurements. Trans. IChemE, Part C, Food and Bioproducts Processing, 84(C4), 353-358.
[Journal paper]

Hooper, R.J., Paterson, W.R. and Wilson, D.I. (2006). Comparison of whey protein model foulants for studying cleaning of milk fouling deposits. Trans. IChemE, Part C, Food and Bioproducts Processing, 84(C4), 329-337.
[Journal paper]

Horrobin, D.J. (1996). The theory of extrusion processes. CPGS Report, Department of Chemical Engineering, University of Cambridge.
[Dissertation]

Horrobin, D.J. and Nedderman, R.M. (1998). Computational analysis of the extrusion of soft solids. In First ESAFORM Conference on Material Forming, Sophia-Antipolis, France, March 17-20, 1998, eds. I. L. Chenot, I. F. Agassant, P. Montmitonnet, B. Vergnes and N. Billon, pp. 461-464.
[Conference paper or poster]

Horrobin, D.J. and Nedderman, R.M. (1998). Die entry pressure drops in paste extrusion. Chemical Engineering Science, 53 (18), 3215-3225.
[Journal paper] [External link]

Huang, J.-Y., Chew, J.Y.M. and Wilson, D.I. (2010). Experimental studies of food fat fouling using a novel spinning disc apparatus. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Huang, J.-Y., Chew, J.Y.M. and Wilson, D.I. (2011). Fouling studies of food fat. 11th International Congress on Engineering and Food, Athens, Greece, May 22-26, 2011.
[Conference paper or poster]

Huang, J.-Y., Chew, J.Y.M. and Wilson, D.I. (2011). Kinetics of wax and fat crystallisation on cooled surfaces. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Huang, J.-Y., Chew, J.Y.M. and Wilson, D.I. (2012). A spinning disc study of fouling of cold heat transfer surfaces by gel formation from model food fat solutions. Journal of Food Engineering, 109 (1), 49-61.
[Journal paper] [External link]

I

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2007). The effect of fouling on heat transfer, pressure drop and throughput in refinery preheat trains: Optimisation of cleaning schedules. In conference proceedings of Heat Exchanger Fouling and Cleaning-VII, Tomar, Portugal.
[Conference paper or poster] [External link]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2008). Thermo-hydraulic channelling in parallel heat exchangers subject to fouling. Chemical Engineering Science, 63, 3400-3410.
[Journal paper]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2008). Platform for techno-economic analysis of fouling mitigation options in refinery preheat trains. Energy and fuels
[Journal paper] [External link]

Ishiyama, E.M., Heins, A.V., Paterson, W.R., Spinelli, L. and Wilson, D.I. (2010). Scheduling cleaning in a crude oil preheat train subject to fouling: Incorporating desalter control. Applied Thermal Engineering
[Journal paper] [External link]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2010). The effect of ageing on fouling-cleaning symbiosis. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2011). Optimum cleaning cycles for heat transfer equipment undergoing fouling. Chemical Engineering Science, 66, 604-612.
[Journal paper] [External link]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2011). The impact of ageing on fouling and cleaning: closing the fouling-cleaning loop. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Ishiyama, E.M., Pugh, S., Paterson, B., Polley, G. and Wilson, D.I. (2011). Management of crude oil preheat trains subject to fouling. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Ishiyama, E.M., Paterson, W.R. and Wilson, D.I. (2011). Exploration of alternative models for the aging of fouling deposits. Environmental and Energy Engineering, 57, 3199-3209.
[Journal paper] [External link]

J

Jones, J.R. and Bridgwater, J (1996). Tomographic studies of particle motion in mixers. The IChemE Research Event – Leeds, 1084-1086, 1996.
[Conference paper or poster]

Jones J.R. and Bridgwater J. (1998). A case of particle mixing in a ploughshare mixer using Positron Emission Particle Tracking. International Journal of Mineral Processing, 53, 29-38.
[Journal paper] [External link]

Jones J.R. and Bridgwater J. (1999). Using Positron Emission Particle tracking to model a mixer as a series of interconnected tanks. The IChemE Research Event - Nottingham, 409-412, 1999.
[Conference paper or poster]

Jones, J.R. and Bridgwater, J. (2000). Granular flow inside a ploughshare mixer. AIChE Meeting, Los Angeles, November 2000, printed December 2001.
[Conference paper or poster]

Jones, J.R. and Bridgwater, J. (2002). Analysis of power in ploughshare mixers. World Congress in Particle Technology, Sydney, July 2002, Paper 648.
[Conference paper or poster]

Jones, J.R., Parker, D.J. and Bridgwater, J. (2001). Effect of blade arrangement on granular flow inside a ploughshare mixer. In 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September, 2001.
[Conference paper or poster]

Jones, S., Bird, M.R., Chew, Y.M.J. and Wilson, D.I. (2010). The application of fluid dynamic gauging to the investigation of synthetic membrane fouling phenomena. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Jones, S., Chew, Y.M.J., Bird, M.R. and Wilson, D.I. (2010). The application of fluid dynamic gauging to the investigation of synthetic membrane fouling phenomena. Food and Bioproducts Processing, 88, 409-418.
[Journal paper] [External link]

Jones, S., Chew, Y.M.J., Wilson, D.I. and Bird, M.R. (2010). Fluid dynamic gauging of microfiltration membranes fouled with sugar beet molasses. Journal of Food Engineering, 108, 22-29.
[Journal paper] [External link]

K

L

Lam, B.P.M. (2004). Convective heat transfer in rotary kilns. CPGS Report, Department of Chemical Engineering, University of Cambridge.
[Dissertation]

Laurent, B.F.C. (2004). Characterisation of wet-mass granulation. European Pharmaceutical review, 95-99.
[Magazine]

Laurent, B.F.C. and Bridgwater, J. (1996). Particle mixing in stirred reactors. The IChemE Research Event - Leeds, 871-873, 1996.
[Conference paper or poster]

Laurent, B.F.C. and Bridgwater, J. (2000). Radial and axial dispersion in a mixer stirred by a single blade. Prepared for presentation at AIChE Annual Meeting, 2000.
[Conference paper or poster]

Laurent, B.F.C. and Bridgwater, J. (2000). Continuous mixing of solids. Chemical Engineering and Technology, 23 (1), 16-18.
[Journal paper]

Laurent, B.F.C., Bridgwater, J. (2002). Dispersive granular flow in a horizontal drum stirred by a single blade. AIChE Journal, 48 (1), 50-58.
[Journal paper]

Laurent, B.F.C. and Bridgwater, J. (2002). Performance of single and six-bladed powder mixers. Chemical Engineering Science, 57, 1695-1709.
[Journal paper] [External link]

Laurent, B.F.C. and Bridgwater, J. (2002). Influence of agitator design on powder flow. Chemical Engineering Science, 57, 3781-3793.
[Journal paper] [External link]

Laurent, B.F.C. and Bridgwater, J. (2002). On the relationship between torque and flow structure in powder mixers. KONA 19, 2002, 118-130.
[Journal paper]

Laurent, B.F.C., Bridgwater, J., Hiseman, M.J.P., Wilson, D.I., Merrifield, D.R. and North, N. (2002). Granulation in a planetary mixer. World Congress in Particle Technology, Sydney, July 2002, Paper 87.
[Conference paper or poster]

Laurent, B., Bridgwater, J. and Parker, D.J. (1997). Investigation of powder flow patterns in a cylindrical mixer stirred by a single blade using PEPT. The IChemE Research Event - Nottingham, 485-488, 1997.
[Conference paper or poster]

Laurent, B.F.C., Bridgwater, J. and Parker, D.J. (2000). Motion in a particle bed agitated by a single bed. AIChE Journal, 46 (9), 1723-1734.
[Journal paper]

Laurent, B.F.C., Bridgwater, J. and Parker, D.J. (2001). Structure of transaxial flow in a powder mixer. 2nd World Congress on Industrial Process Tomography, Hannover, August 2001.
[Conference paper or poster]

Laurent, B.F.C., Bridgwater, J. and Parker, D.J. (2002). Convection and segregation in a horizontal mixer. Powder Technology, 123, 9-18.
[Journal paper] [External link]

Laurent B., Bridgwater J. and Reisemann M. (1999). Kontinuierliches Feststoffmischen (Continuous powder mixing, in German). Chemie-Ing. Techn., 71, 583-585.
[Journal paper]

Laurent, B.F.C and Cleary, P.W. (2002). Comparitive study of DEM and experimental results of flow patterns in a ploughshare mixer. 3rd Intenational Conference on DEM, Sante Fe, USA, 2002.
[Conference paper or poster]

Li, Y.Y. and Bridgwater, J. (2000). Prediction of extrusion pressure using an artificial neural network. Powder Technology, 108, 65-73.
[Journal paper] [External link]

Li, Y.Y., Perera, S.P., Crittenden, B.D. and Bridgwater, J. (2001). The effect of the binder on the manufacture of a 5A zeolite monolith. Powder Technology, 116, 85-96.
[Journal paper] [External link]

Li, B.L., Clarke, S.M., Wilson, D.I. (2011). Solid monolayers of glycerides adsorbed on the surface of graphite powder. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 389, 180-187.
[Journal paper] [External link]

Liaw, M.S., Mackley, M.R., Bayly, A.E., Bridgwater, J. and Moggridge, G.D. (2003). Multilamellar vesicles in a commercial surfactant system. AIChE Journal, 49 (11), 2966-2973.
[Journal paper]

Lim, S.-Y., Davidson, J.F., Forster, R.N., Parker, D.J., Scott, D.M. and Seville, J.P.K. (2003). Avalanching of granular material in a horizontal slowly rotating cylinder: PEPT studies. Powder Technology, 138, 25-30.
[Journal paper] [External link]

Lister, V.Y., Davidson, J.F.and Wilson, D.I. (2012). Calculating thermal fouling resistances from dynamic heat transfer measurements. Chemical Engineering Science, 84 , 772-780.
[Journal paper]

Lister, V.Y., Lucas, C., Gordon, P.W., Chew, Y.M.J. and Wilson, D.I. (2011). Pressure mode fluid dynamic gauging for studying cake build-up in cross-flow microfiltration. Journal of Membrane Science, 366, 304-313.
[Journal paper] [External link]

Lister, V.Y., Augustin, W., Chew, Y.M.J., Gordon, P.W., Mayer, M., Paterson, W.R., Peralta, J.M., Scholl, S. and Wilson, D.I. (2011). Dynamic gauging of fouling layers on solid and porous surfaces. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Liu, Y. and Bridgwater, J. (1997). Numerical modelling with 3D-BEM for surface crack analysis in extrusion problems. In Boundary Elements XIX (proceedings of the 19th International Conference on the Boundary Element Method, Rome, Italy, September 1997), eds. M. Marchetti, C. A. Brebbia and M. H. Aliabadi, pp. 181-190. Computational Mechanics Publications, Southampton, UK.
[Conference paper or poster]

Liu, Y., Bridgwater, J. and Antes, H. (1997). A generalized viscoplastic constitutive model with a mixed strain hardening for implicit BEM. In Boundary Elements XIX (proceedings of the 19th International Conference on the Boundary Element Method, Rome, Italy, September 1997), eds. M. Marchetti, C. A. Brebbia and M. H. Aliabadi, pp. 181-190. Computational Mechanics Publications, Southampton, UK.
[Conference paper or poster]

M

Macchietto, S., Hewitt, G.F., Coletti, F., Crittenden, B.D., Dugwell, D.R., Galindo, A., Jackson, G., Kandiyoti, R., Kazarian, S.G., Luckham, P.F., Matar, O.K., Millan-Agorio, M., Muller, E.A., Paterson, W., Pugh, S.J., Richardson, S.M. and Wilson, D.I. (2011). Fouling in crude oil preheat trains: A systematic solution to an oild problem. Heat Transfer Engineering, 32(3-4), 197-215.
[Journal paper] [External link]

Mantle, M.D., Bardsley, M.H., Gladden, L.F. and Bridgwater, J. (2004). Laminations in ceramic forming - mechanisms revealed by MRI. Acta Materialia, 52, 899-909.
[Journal paper] [External link]

Martin, P.J. and Wilson, D.I. (????). Production of water dispersible granules by paste extrusion (no other source information).
[Conference paper or poster]

Martin, P.J. and Wilson, D.I. (2002). Mechanics of paste flow in radial screen extruders. 4th World Congress in Particle Technology, Sydney, Australia.
[Conference paper or poster]

Martin, P.J. and Wilson, D.I. (2003). A critical assessment of the Jastrzebski interface condition for the capillary flow of pastes, foams and polymers. Chem. Eng. Sci, 60, 493-502.
[Journal paper]

Martin, P.J., Wilson, D.I. and Bonnett, P.E. (2004). Rheological study of a talc-based paste for extrusion-granulation. Journal of the European Ceramic Society, 24, 3155-3168.
[Journal paper] [External link]

Martin, P.J., Wilson, D.I. and Challis, K. (2001). Extrusion of pastes through non-axisymmetric systems. In 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September, 2001.
[Conference paper or poster]

Martin, P.J., Odic, K.N., Russell, A.B., Burns, I.W. and Wilson, D.I. (2008). Rheology of commercial and model ice creams. Appl. Rheol., 18, 12913-1 - 12913-11.
[Journal paper]

Mascia, S. (2005). The future of process design. European Pharmaceutical Review, 2, 97-101.
[Journal paper]

Mascia, S., Patel, M.J., Rough, S.L., Martin, P.J. and Wilson, D.I. (2006). Liquid phase migration in the extrusion and squeezing of microcrystalline cellulose pastes. European Journal of Pharmaceutical Sciences, 29 (1), 22-34.
[Journal paper] [External link]

Mascia, S. and Wilson, D.I. (2007). Rheology of concentrated granular suspensions undergoing squeeze flow. Journal of Rheology, 51 (3), 493-515
[Journal paper]

Mercadé-Prieto. R., Sahoo, P.K., Falconer, R.J., Paterson, W.R. and Wilson, D.I. (2006). Polyelectrolyte screening effects on the dissolution of whey protein gels at high pH conditions. Food Hydrocolloids.
[Journal paper]

Mercadé-Prieto. R., Falconer, R.J., Paterson, W.R. and Wilson, D.I. (2006). Probing the mechanisms limiting dissolution of whey protein gels during cleaning. Food and Bioproducts Processing, 84 (C4), 1-9.
[Journal paper]

Mercadé-Prieto. R., Falconer, R.J., Paterson, W.R. and Wilson, D.I. (2006). Effect of gel structure on the dissolution of heat-induced β-lactoglobulin gels in alkali. Journal of Agriculture and Food Chemistry, 54 (15), 5437-5444.
[Journal paper] [External link]

Mercadé-Prieto. R., Falconer, R.J., Paterson, W.R. and Wilson, D.I. (2007). Swelling and dissolution of β-Lactoglobulin gels in alkali. Biomacromolecules, 8, 469-476.
[Journal paper]

Mercadé-Prieto. R., Paterson, W.R. and Wilson, D.I. (2007). The pH threshold in the dissolution of β-Lactoglobulin gels and aggregates in alkali. Biomacromolecules, 8, 1162-1170.
[Journal paper]

Mercadé-Prieto. R., Paterson, W.R. and Wilson, D.I. (2008). Caustic-induced gelation of β-lactoglobulin. International Journal of Food Science and Technology, 43, 1379-1386
[Journal paper] [External link]

Mercadé-Prieto. R., Paterson, W.R. and Wilson, D.I. (2008). Comparison between the dissolution of whey protein gels and of synthetic polymers. Journal of Polymer Science Part B, 46, 1007-1021.
[Journal paper]

Mercadé-Prieto. R., Paterson, W.R., Chen, X.D. and Wilson, D.I. (2008). Diffusion of NaOH into a protein gel. Chemical Engineering Science, 63, 2763-2772.
[Journal paper]

Mercadé-Prieto. R., Wilson, D.I. and Paterson, W.R. (2008). Effect of the NaOH concentration and temperature on the dissolution mechanisms of β-Lactoglobulin gels in alkali. International Journal of Food Engineering, 4(5)
[Journal paper]

Mercadé-Prieto. R., Paterson, W.R. and Wilson, D.I. (2009). Effect of salts on the alkaline degradation of β-Lactoglobulin gels and aggregates: Existence of a dissolution threshold. Food Hydrocolloids, 23, 1587-1595.
[Journal paper]

Mercadé-Prieto. R., Gunasekaran, S., Paterson, W.R. and Wilson, D.I. (2010). Fundamentals of model protein gel dissolution: the path to elucidating industrial dairy cleaning. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Meza, B.E., Chesterton, A.K.S., Verdini, R.A., Rubiolo, A.C., Sadd, P.A., Moggridge, G.D. and Wilson, D.I. (2011). Rheological characterisation of cake batters generated by planetary mixing: Comparison between untreated and heat-treated wheat flours. Journal of Food Engineering, 104, 592-602.
[Journal paper] [External link]

Murray, T., Rough, S.L. and Wilson, D.I. (2007). The effect of drying technique on tablets formed from extrusion-spheronization granules. Trans IChemE, Part A, Chem. Eng. Res. And Des., 85(A7), 996-1004
[Journal paper]

N

` Nigo, R.Y., Chew, Y.M.J., Houghton, N.E., Paterson, W.R. and Wilson, D.I. (2009). Experimental studies of freezing fouling of model food fat solutions using a novel spinning disc apparatus. Energy Fuels, 23, 6131-6145
[Journal paper]

O

Ouchiyama, N., Benbow, J.J. and Bridgwater, J. (1987). On the fracture toughness of extrudates and its relationship to rates of bulk particle attrition. Powder Technology, 51, 103-114.
[Journal paper]

Ouchiyama, N., Rough, S.L. and Bridgwater, J. (2005). A population balance approach to describing bulk attrition. Chemical Engineering Science, 60 (5), 1429-1440.
[Journal paper] [External link]

Ovenston, Mrs. A. and Benbow, J.J. (1968). Effects of die geometry on the extrusion of clay-like material. Transactions of the British Ceramic Society, 67 (11), 543-567.
[Journal paper]

P

Patel, M.J., Blackburn, S. and Wilson, D.I. (2007). Modelling of paste flows subject to liquid phase migration. Int. J. for Numerical Methods in Engineering, 72, 1157-1180.
[Journal paper] [External link]

Patel, M.J. (2006). Modelling of paste flows subject to liquid phase maldistribution. In proceedings of the 5th World Congress of Particle Technology, Orlando, Florida, 23-27 April, 2006.
[Conference paper or poster]

Patel, M.J., Wedderburn, J., Blackburn, S. and Wilson, D.I. (2008). Maldistribution of fluids in extrudates. Journal of the European Ceramic Society, 29, 937-941.
[Journal paper] [External link]

Paterson, W.R., Berresford, E.L., Moppett, D.L., and Scott, D.M., Simmons, V.K. and Thorpe, R.B. (2000). Gas flow maldistribution in moving beds of monosized particles. Chemical Engineering Science, 55, 3515-3527.
[Journal paper] [External link]

Paterson, W.R., Chew, J.Y.M. and Wilson, D.I. (2005). A new method for testing adhesion and cleanability of surfaces. In Hygienic Coatings and Surfaces, Paris, France.
[Conference paper or poster]

Peck, M.C., Rough, S.L. & Wilson, D.I. (2005). Roller extrusion of a ceramic paste. Industrial & engineering chemistry research, 44, 4099-4111.
[Journal paper] [External link]

Peralta, J.M., Chew, Y.M.J. and Wilson, D.I. (2011). An analytical method for selecting the optimal nozzle external geometry for fluid dynamic gauging. Chemical Engineering Science, 66, 3579-3591.
[Journal paper] [External link]

Pittas C.A., Mitchell M.J., Barrie P.J. and Wilson D.I. (2011). A critical analysis of the compensation effect and its application to heat exchanger fouling studies. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Pogiatzis, T., Vassiliadis, V.S. and Wilson D.I. (2011). An MINLP formulation for scheduling the cleaning of heat exchanger networks subject to fouling and ageing. Heat Exchanger Fouling and Cleaning - 2011, Crete Island, Greece, June 05-10, 2011.
[Conference paper or poster]

Pogiatzis, T., Ishiyama, E.M., Paterson, W.R., Vassiliadis, V.S. and Wilson, D.I. (2011). Identifying optimal cleaning cycles for heat exchangers subject to fouling and ageing. Applied Energy, 89, 60-66.
[Journal paper] [External link]

Pogiatzis, T., Wilson, D.I. and Vassiliadis, V.S. (2012). Scheduling the cleaningactions for afouledheatexchangersubject to ageing: MINLP formulation. Computers and Chemical Engineering, 39, 179-185.
[Journal paper] [External link]

Polley, G.T., Tamakloe, E., Picon Nunez, M., Ishiyama, E.M., Wilson, D.I. (2012), Applying thermo-hydraulic simulation and heat exchanger analysis to the retrofit of heat recovery systems. Applied Thermal Engineering, 51, 137-143. [Journal paper]

Polley, G.T., Wilson, D.I., Pugh, S.J. and Petitjean, E. (2007). Extraction of Crude Oil Fouling Model Parameters from Plant Exchanger Monitoring. Heat Transfer Engineering, 28(3), 185-192.
[Journal paper]

Polley, G.T., Morales-Fuentes, A. and Wilson, D.I. (2009). Simultaneous consideration of flow and thermal effects of fouling in crude oil preheat trains. Heat Transfer Engineering, 30(10-11), 815-821.
[Journal paper]

Pore, M., Seah, H.H., Glover, J.W.H., Holmes, D.J., Johns, M.L., Wilson, D.I. and Moggridge, G.D. (2009). In-situ X-ray studies of cocoa butter droplets undergoing simulated spray freezing. J. Am. Oil Chem. Soc., 86, 215-225.
[Journal paper]

Q

Qi, X.G., Scott, D.M. and Wilson, D.I. (2008). Modelling laminar pulsed flow in rectangular microchannels. Chemical Engineering Science, 63, 2682-2689.
[Journal paper]

R

Rahman, L., Rowe, P., Cheyne, A. and Wilson, D.I. (2002). Ram extrusion of potato starch dough through multi-holed dies. Trans. IChemE, Part C, Food & Bioproducts Processing, 80(C), 12-19.
[Journal paper]

Reddington, D. and Bridgwater, J. (1993). Prediction of multichannel paste flow. In proceedings of the 3rd Euro-Ceramics Conference, Madrid, Spain, 1993.
[Conference paper or poster]

Rough, S.L., Bridgwater, J. and Wilson, D.I. (2000). Effects of liquid phase migration on extrusion of microcrystalline cellulose pastes. International Journal of Pharmaceutics, 204, 117-126.
[Journal paper] [External link]

Rough, S.L., Bridgwater, J. and Wilson, D.I. (2000). Modelling of paste extrusion subject to liquid phase redistribution. Proceedings of Chemeca 2000, 400-405, Perth, Australia, 2000.
[Conference paper or poster]

Rough, S.L., Bridgwater, J. and Wilson, D.I. (2002). In situ measurements of the porosities and permeabilities of alumina pastes. Powder Technology, 123, 262-274.
[Journal paper] [External link]

Rough, S.L. and Wilson, D.I. (2004). The production of homogenous extrudates of microcrystalline cellulose pastes. International Journal of Pharmaceutics, 276, 185-189.
[Journal paper] [External link]

Rough, S.L. and Wilson, D.I. (2005). Extrudate fracture and spheronisation of microcrystalline cellulose pastes. Journal of Materials Science, 40, 4199-4219.
[Journal paper]

Rough, S.L., Wilson, D.I., Bayly, A. and York, D. (2003). Tapping characterisation of high shear mixer agglomerates made with ultra-high viscosity binders. Powder Technology, 132, 249-266.
[Journal paper] [External link]

Rough, S.L., Wilson, D.I. and York, D.W. (2004). Effects of solids formulation on the manufacture of high shear mixer agglomerates. Advanced Powder Technology, 16 (2), 145-169.
[Journal paper]

Rough, S.L., Wilson, D.I. and York, D.W. (2005). A regime map for stages in high shear mixer agglomeration using ultra-high viscosity binders. Advanced Powder Technology, 16 (4), 373-386.
[Journal paper]

Rough, S.L., Wilson, D.I., Bayly, A. and York, D. (2005). Influence of process parameters on the tapping characteristics of high shear mixer agglomerates made with ultra-high viscosity binders. Trans. IChemE, Part A, Chem. Eng. Res. Des., 83, 7-23.
[Journal paper]

Rough, S.L., Wilson, D.I. and Bridgwater, J. (2002). A model describing liquid phase migration within an extruding microcrystalline cellulose paste. Trans. IChemE, Part A, 80, 701-714.
[Journal paper]

Russell, B.D., Blackburn, S., Lasenby, J. and Wilson, D.I. (2002). On-line monitoring of pastes undergoing extrusion. paper 345, 4th World Congress in Particle Technology, Sydney, Australia.
[Conference paper or poster]

Russell, B.D., Blackburn, S., Lasenby, J. and Wilson, D.I. (2003). Signal processing for on-line control of paste extrusion. Paper 47d, AIChE Annual Conference, San Francisco, USA, November 2003.
[Conference paper or poster]

Russell, B.D., Blackburn, S. and Wilson, D.I. (2006). A study of surface fracture in paste extrusion using signal processing. Journal of Materials Science, 41 (10), 2895-2906.
[Journal paper]

Russell, B.D., Lasenby, J., Blackburn, S. and Wilson, D.I. (2003). Characterising paste extrusion behaviour by signal processing of pressure sensor data. Powder Technology, 132, 233-248.
[Journal paper] [External link]

Russell, B.D., Lasenby, J., Blackburn, S. and Wilson, D.I. (2004). Monitoring structural aspects of pastes undergoing continuous extrusion using signal processing of pressure data. Trans. IChemE, Part A, Chemical Engineering Research and Design, 82(A6), 770-783.
[Journal paper]

S

Sahoo, P.K., Chew, Y.M.J., Mercadé-Prieto, R., Wilson, D.I. and Dai, X.W. (2008). Fluid dynamic gauging studies of swelling behaviour of whey protein gels in NaOH/NaCl solutions. International Journal of Food Science and Technology, 43, 1901-1907.
[Journal paper]

Saikhwan, P., Geddert, T., Augustin, W., Scholl, S., Paterson, W.R. and Wilson, D.I. (2006). Effect of surface treatment on cleaning of a model food soil. Surface & Coatings Technology, 201, 943-951.
[Journal paper] [External link]

Saikhwan, P., Chew, Y.M.J., Paterson, W.R. and Wilson, D.I. (2007). Fluid dynamic gauging: a technique for studying the cleaning of food process surfaces. Food Manufacturing Efficiency , 1 (2), 35-41.
[Journal paper]

Saikhwan, P., Mercadé-Prieto. R., Chew, Y.M.J., Paterson, W.R. and Wilson, D.I. (2010). Swelling and dissolution in cleaning of whey protein gels. Fouling and Cleaning in Food Processing, Department of Chemical Engineering and Biotechnology, Cambridge, UK.
[Conference paper or poster]

Saikhwan, P., Mercadé-Prieto. R., Chew, Y.M.J., Gunasekaran, S., Paterson, W.R. and Wilson, D.I. (2010). Swelling and dissolution in cleaning of whey protein gels. Food and Bioproducts Processing, 88, 375-383.
[Journal paper] [External link]

Salley, B., Gordon, P.W., McCormick, A.J., Fishera, A.C. and Wilson, D.I. (2012). Characterising the structure of photosynthetic biofilms using fluid dynamic gauging. Biofouling: The Journal of Bioadhesion and Biofilm Research, 28, 159-173.
[Journal paper] [External link]

Scott, D.M. and Davidson, J.F. (2004). Dynamics of particles in a rotary kiln. Invited Chapter in Advances in Granular Materials: Fundamentals and Applications, eds S.J. Antony, W. Hoyle and Y.L. Ding, Royal Society of Chemistry, 2004, ISBN 0-85404-586-4, pp 319-335.
[Book or chapter therein]

Scott, D.M., Davidson, J.F., Lim, S.-Y. and Spurling, R.J. (2008). Flow of granular material through an inclined, rotating cylinder fitted with a dam. Powder Technology, 182 (3), 466-473
[Journal paper]

Scott, D.M., Davidson, J.F., Cheah, S.E., Chua, W.L.C., Gummow, J.G., Lam, B.P.M. and Reder, I. (2009). Transient granular flows in an inclined rotating cylinder: filling and emptying. Industrial & Engineering Chemistry Research, 48, 159-165.
[Journal paper] [External link]

Somasundram, I.M., Cendrowicz, A., Wilson, D.I. and Johns, M.L. (2008). Phenomenological study and modelling of wick debinding. Chem. Eng. Sci., 63 (14), 3802-3809
[Journal paper] [External link]

Somasundram, I.M., Cendrowicz, A., Johns, M.L. and Wilson, D.I. (2008). A new understanding of wick debinding. In Drying 2008, proceedings of the 16th International Drying Symposium, Hyderabad, India, November 9th-12th, 2008, Vol. A, 259-264
[Conference paper or poster]

Somasundram, I.M., Johns, M.L. and Wilson, D.I. (2009). An improved model for simulation of wick debinding of moulded parts. In 17th Plansee Seminar 2009, Reutte, Austria, May 25th-29th, 2009, Vol. 3, WS10/1-10
[Conference paper or poster]

Somasundram, I.M., Cendrowicz, A., Johns, M.L., Prajapati, B. and Wilson, D.I. (2010). 2-D simulation of wick debinding for ceramic parts in close proximity. Chem. Eng. Sci., 65 (22), 5990-6000.
[Journal paper] [External link]

Song, B., Rough, S.L. and Wilson, D.I. (2006). Effects of drying technique on extrusion-spheronisation granules and tablet properties. International Journal of Pharmaceutics, doi:10.1016/j.ijpharm.2006.09.050
[Journal paper]

Spitteler, P.H. J., Gladden, L.F., Donald, A.M. and Bridgwater, J. (1998). ESEM and MRI imaging of water-based ceramic pastes. In World Congress on Particle Technology 3, Brighton, UK, Ju1y 6-9 1998, paper 306. Institution of Chemical Engineers, Rugby, UK.
[Conference paper or poster]

Spurling, R.J., Davidson, J.F. and Scott, D.M. (2000). Flow of granular material through rotating cylinders: modelling transients. Proceedings of the Materials Research Society (USA), Spring Meeting, April 2000, San Francisco, USA, Symposium Proceedings Vol. 627, BB5.5.
[Conference paper or poster]

Spurling, R.J., Davidson, J.F. and Scott, D.M. (2000). The no-flow problem for granular material in rotating kilns and dish granulators. Chemical Engineering Science, 55, 2303-2313.
[Journal paper] [External link]

Spurling, R.J., Davidson, J.F. and Scott, D.M. (2001). The transient response of granular flows in an inclined rotating cylinder. Trans. IChemE, 79(A), 51-61.
[Journal paper]

Stevenson, P., Thorpe, R.B., Kennedy, J.E. and McDermott, C. (2001). The transport of particles at low loading in near-horizontal popes by intermittent flow. Chemical Engineering Science, 56, 2149-2159.
[Journal paper] [External link]

Stewart, R.L., Bridgwater, J. (2000). Granular flow in a vertical cylinder stirred by a flat blade. Prepared for presentation at AIChE Annual Meeting, 2000.
[Conference paper or poster]

Stewart, R.L., Bridgwater, J., Zhou, Y.C. and Yu, A.B. (2001). Simulated and measured flow of granules in a bladed mixer - a detailed comparison. Chemical Engineering Science, 56, 5457-5471.
[Journal paper] [External link]

Stewart, R.L., Bridgwater, J. and Parker, D.J. (2001). Granular flow over a flat-bladed stirrer. Chemical Engineering Science, 56, 4257-4271.
[Journal paper] [External link]

T

Taylor, J.E., Van Damme, I., Johns, M.L., Routh, A.F. and Wilson, D.I. (2009). Shear rheology of molten crumb chocolate. Journal of Food Science, 74(2), 55-61.
[Journal paper]

Third, J.R., Scott, D.M. and Scott, S.A. (2010). Axial dispersion of granular material in horizontal rotating cylinders. Powder Technology, 203, 510-517.
[Journal paper] [External link]

Third, J.R., Scott, D.M., Scott, S.A. and Müller, C.R. (2010). Tangential velocity profiles of granular material within horizontal rotating cylinders modelled using the DEM. Granular Matter, 12, 587-595.
[Journal paper] [External link]

Third, J.R., Scott, D.M., Scott, S.A. and Müller, C.R. (2011). Effect of periodic boundary conditions on granular motion in horizontal rotating cylinders modelled using the DEM. Granular Matter, 13, 75-78.
[Journal paper] [External link]

Third, J.R., Scott, D.M., Scott, S.A. and Müller, C.R. (2011). Axial transport within bidisperse granular media in horizontal rotating cylinders. Physical Review E, 84, 041301.
[Journal paper] [External link]

Tuladhar, T.R., Chew, J.Y.M., Paterson, W.R. and Wilson, D.I. (2002). Dynamic gauging investigations of cleaning-in-place of whey protein solids on solid surfaces. In Proc. Fouling, Cleaning and Disinfectant in Food Processing, Department of Chemical Engineering, Cambridge, UK.
[Conference paper or poster]

U

V

W

Wang,T., Davidson, J.F., and Wilson, D.I. (2012). Effect of surfactant on flow patterns and draining films created by a static horizontal liquid jet impinging on a vertical surface at low flow rates. Chemical Engineering Science, 88, 79-94. [Journal paper] [External link]

Wang,T., Davidson, J.F., and Wilson, D.I. (2012). Drainage flow patterns created by liquid jets impinging on vertical walls. 62nd Conference of Canadian Society of Chemical Engineering, Vancouver, BC, October 2012.
[Conference paper or poster]

White, D.E., Moggridge, G.D. and Wilson, D.I. (2008). Solid-liquid transitions in the rheology of a structured yeast extract paste, Marmite™. Journal of Food Engineering, 88, 353-363.
[Journal paper] [External link]

White, D.E., Moggridge, G.D. and Wilson, D.I. (2008). Novel rheology in a structured food product - Marmite™. In XVth International Congress on Rheology, Monterey, California, USA, 3-8 August 2008.
[Conference paper or poster] [External link]

White, L.J., Covey, G.H., Laurent, B.F.C. and Bridgwater, J. (2001). PEPT and the pan pelletizer. In 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September, 2001.
[Conference paper or poster]

White, L.J., Covey, G.H., Laurent, B.F.C. and Bridgwater, J. (2002). Comparison of segregation in rolling and cascading/cataracting beds. World Congress in Particle Technology, Sydney, July 2002, Paper 412.
[Conference paper or poster]

Williamson, M.E. and Wilson, D.I. (2009). Development of an improved heating system for industrial tunnel baking ovens. Journal of Food Engineering, 91, 64-71.
[Journal paper]

Wilson, D.I. and Rough, S.L. (2006). Exploiting the curious characteristics of dense solid-liquid pastes. Chemical Engineering Science, 61 (13), 4147-4154.
[Journal paper] [External link]

Wilson, D.I. and Rough, S.L. (2012). Paste engineering: Multi-Phase materials and multi-phase flows. The Canadian Journal of Chemical Engineering, 90, 277-289.
[Journal paper] [External link]

Wilson, D.I., Le, B.L., Dao, H.D.A., Lai, K.Y., Morison, K.R. and Davidson, J.F. (2012). Surface flow and drainage films created by horizontal impinging liquid jets. Chemical Engineering Science, 68 (13), 449-460.
[Journal paper] [External link]

Wilson, D.I., Salley B., McCormick, A., Gordon, P.W., and Fisher A. (2012). Fluid dynamic gauging of bioprocessing biofilms on different substrates. 62nd Conference of Canadian Society of Chemical Engineering, Vancouver, BC, October 2012.
[Conference paper or poster]

Wright, D.M., Saracevic, Z.S., Kyle, N.H., Motskin, M. and Skepper, J.N. (2009). The mesoporosity of microparticles spray dried from trehalose ana nanoparticle hydroxyapatite depends on the ratio of nanoparticles to sugar and nanoparticle surface charge. Journal of Materials Science, 21, 189-206.
[Journal paper] [External link]

X

Y

Yeap, B.L., Wilson, D.I., Polley, G.T. and Pugh, S.J. (2004). Mitigation of crude oil refinery heat exchanger fouling through retrofits based on thermo-hydraulic fouling models. Trans. IChemE, Part A, Chem. Eng. Res. Des., 82A, 53-71.
[Journal paper]

Yoo, J.Y., Chen, X.D., Mercadé-Prieto, R. and Wilson, D.I. (2006). Dissolving heat-induced protein gel cubes in alkaline solutions under natural and forced convection conditions. Journal of Food Engineering, In press.
[Journal paper] [External link]

Yu, A.B. and Bridgwater, J. (1996). Porosity calculation of mixtures of alumina powders. In Chemeca '96 (24th Australian and New Zealand Chemical Engineering Conference, Sydney, Australia, September 30-October 2 1996), vol. 5 (Particle Technology Workshop, ed. G. Weiss), pp. 123-128. The Institution of Engineers, Barton, Australia.
[Conference paper or poster]

Yu, A.B., Bridgwater J. and Burbidge, A.S. (1997). On the modelling of the packing of fine particles. Powder Technology, 92, 185-194.
[Journal paper] [External link]

Yu, A.B., Bridgwater, J., Burbidge, A.S. and Saracevic, Z. (1999). Liquid maldistribution in particulate paste extrusion. Powder Technology, 103, 103-109.
[Journal paper] [External link]

Z

Zhang, T., Blackburn, S. and Bridgwater, J. (1994). Properties of ceramic suspensions for injection moulding based on agar binders. British Ceramic Transactions, 93 (5), 1-5.
[Journal paper]

Zhang, T., Blackburn, S. and Bridgwater, J. (1996). Debinding and sintering defects from particle orientation in ceramic injection moulding. Journal of Materials Science, 31, 5891- 5896.
[Journal paper]

Zhang, T., Blackburn, S. and Bridgwater, J. (1997). The orientation of binders and particles during ceramic injection moulding. Journal of the European Ceramic Society, 17, 101-108.
[Journal paper] [External link]

Zhang, M., Rough, S.L., Ward, R., Seiler, C. and Wilson D.I. (2011). A comparison of ram extrusion by single-holed and multi-holed dies for extrusion–spheronisation of microcrystalline-based pastes. International Journal of Pharmaceutics, 416, 210-222.
[Journal paper] [External link]

Zhang, M., Rough, S.L., Ward, R., Seiler, C. and Wilson D.I. (2011). Multi-holed die extrusion for assessing paste formulations for granulation by extrusion-spheronisation. 5th International Granulation Workshop, Lausanne, Switzerland, June 20-22, 2011.
[Conference paper or poster]

Zhou, Y.C., Yu, A.B. and Bridgwater, J. (2002). The effect of blade speed on granular flow in a cylindrical mixer. World Congress in Particle Technology, Sydney, July 2002, Paper 222.
[Conference paper or poster]

Zhou, Y.C., Yu, A.B. and Bridgwater, J. (2003). Segregation of binary mixture of particles in a bladed mixer. Journal of Chemical Technology and Biotechnology, 78, 187-193.
[Journal paper]

Zhou, Y.C., Yu, A.B., Stewart, R.L. and Bridgwater, J. (2001). Simulation of particle flow in a bladed mixer. In 6th World Congress of Chemical Engineering, Melbourne, Australia, 23-27 September, 2001.
[Conference paper or poster]


Copyright Information

Dissertations:
Single copies may be downloaded and printed for the reader's personal research and study. Copyright held by the authors. Documents are reproduced here with permission.

Journal articles available on this site:
Single copies of these articles may be downloaded and printed for the reader's personal research and study. Copyright held by the authors. Documents are reproduced here with permission.

Conference papers:
Single copies of these articles may be downloaded and printed for the reader's personal research and study. Copyright held by the authors. Documents are reproduced here with permission.

Back to dissertations
Back to journal and conference articles