Major refereed conference proceedings from 2000
Proc. X111 Int. Cong. Rheology, Cambridge, UK, 2000
MR Mackley and M Thompson.
The low and high shear rheology of emulsions of water in alkyd resin as a model for lithographic printing inks.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 3, 279-281 (2000)
S Wannaborworn and MR Mackley.
Deformation and breakup of viscous drops in osccillatory shear.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 2, 250-252 (2000)
RPG Rutgers, MR Mackley, LE Rodd and A Bernnat.
Die gap geometry and wall boundary condition effects on the formation of extrusion surface instabilities for polyethylene melts.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 3, 179-181 (2000)
K Lee and MR Mackley.
The effect of strain history on the entry flow of polythylene.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 1, 115-117 (2000)
J Engmannn and MR Mackley.
Changes in microstructure and rheological behaviour of chocolate during extrusion.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 4, 368-370 (2000)
YK Cheng, MR Mackley MR Mackley and T Sayer.
Colour rheology measurements and its link to microstructural change.
ed. DM Binding, NE Hudson, J Mewis, JM Piau, CJS Petrie, P Townsend and M Wagner, 3, 40-42 (2000)
6th European Congress of Rheology. Erlangen, Germany, Sept 1-6 2002
The multipass rheometer; design and application.
ed. H Munsted, J Kaschta and A Merten, 31-32 (2002)
DR Arda and MR Mackley.
The effect of gas assisted extrusion on sharkskin extrusion instabilities in LLDPE.
ed. H Munsted, J Kaschta and A Merten, 143-144 (2002)
Y Chen, MR Mackley and T Nicholson.
The quantification and numerical simulation of the processing behaviour for small quantities of molecularly tailored polystyrene.
ed. H Munsted, J Kaschta and A Merten, 443-444 (2002)
RB Cooke, MR Mackley and GC Maitland.
The effect of air or particulate inclusions on the rheology and processing behaviour of a wormlike micelle base matrix.
ed. H Munsted, J Kaschta and A Merten, 437-738 (2002)
MW Collis and MR Mackley.
The comparison of flow simulation for mono and polydisperse polymer melts with laboratory flow birefringence studies.
ed. H Munsted, J Kaschta and A.Merten, 257-258 (2002)
XIVth International Congress of Rheology, Seoul, Korea, 22-27th August 2004
B Hallmark and MR Mackley.
The effect of polymer rheology and processing conditions on the manufacture of novel micro-capillary film extrusions
R Valette, G Hernadez Fernandez and MR Mackley.
The effect of compressibility, shear thinning, viscoelasticity and absolute pressure on time dependent pressure driven polymer melt flow.
KD Coventry, MR Mackley and R Valette.
The matching of Cross Slot time dependent extensional flow experiments with numerical simulation for polydisperse and monodisperse molten polymers.
TR Tuladhar and MR Mackley.
The pressure dependant evolution of rheology and micro-structureof pentane loaded molten polystyrene during controlled foaming.
YW Chen and MR Mackley.
The rheological behaviour of flexible chocolate during and after processing.
M Collis and MR Mackley.
Microscale processing of monodisperse polystyrene melts and their blends.
2nd Annual European Rheology Conference. April 21-23, 2005 ,Grenoble - France
K Coventry, M Mackley.
Cross-Slot Extensional Flow Experiments for Polydisperse and Monodisperse Polymer Melts and Solutions
M Mackley, KN Odic, DJ Cebula, A Russel.
The Rheology of Model Ice cream Systems
TR Tuladhar, MR Mackley
The effect of blowing agents on the polystyrene melt rheology and bubble growth kinetics during foaming.
G. Hernandez Fernandez del Castillo, M. R. Mackley
Experimental observations of Flow induced crystallisation of polyethylene compared with numerical simulations of a wedged channel.
7th World Congress of Chemical Engineering Glasgow 10-14 July 2005
CH Hornung , B Hallmark , RP Hesketh , MR Mackley Novel microreactor design using thermoplastic microcapillary films
NC Nowjee , MR Mackley
The melt rheology and foaming behaviour of starch using a Multipass Rheometer
G Hernandez Fernandez del C , MR Mackley
Flow induced crystallisation of polyethylene in a multipass rheometer
B Skelton , TE Bustnes, MR Mackley
Development of the oscillatory flow based process for the production of biodiesel transport fuel
TE Bustnes, CF Kaminski, MR Mackley
Micro-optical measurements of deposition and release of biomass in a high voidage fibre network
TR Tuladhar, MR Mackley
The development of polymer foam microstructure: experimental observations and matching modelling for polystyrene foams using different blowing agents
AERC 2006 3rd Annual European Rheology Conference, April 27-29, Hersonisos - Crete
T. Tuladhar, M. Mackley.
High shear rheology and filament stretching of inkjet fluids
D Hassell, M Mackley.
Stress build-up within polyethylene melts in cross-slot flow