skip to content

MR Mackley and S Solbai.
Swell drawing; a new process for manufacturing high performance polyethylene.
Polymer, 28, 1115-1120 (1987)

MR Mackley and S Solbai.
Die free spinning; a new process for manufacturing high performance polyethylene.
Polymer, 28, 1111-1114 (1987)

CA Anton, MR Mackley and S Solbai.
Extrusion process of ultra high molecular weight polyethylene.
Polymer Bulletin, 17, 175-179 (1987)

MR Mackley.
The rheology and micro structure of flowing thermotropic liquid crystal polymers.
Mol. Cryst. Liq. Cryst., 153, 249-261 (1987)

P Gao, MR Mackley and TM Nicholson.
Development of anisotropy in ultra high molecular weight polyethylene.
Polymer, 31, 237-242 (1990)

P Gao and MR Mackley.
The effect of presolvent loading on the ultimate drawability of ultra high molecular weight polyethylene.
Polymer, 32, 17, 3136-3139 (1991)

P Gao and MR Mackley.
Surface treatment of ultra high molecular weight polyethylene to enhance adhesion and conductivity properties.
Polymer, 33, 19, 4075-4080 (1992)

P Gao and MR Mackley.
A general model for diffusion and swelling of polymers and its application to ultra high molecular weight polyethylene.
Proc. Roy. Soc. (Lond.), 444, 267-285 (1994)

MR Mackley.
The scientific and technological route to the manufacture of high modulus polyethylene.
Materials Research Society Bulletin, 22, 9 (Sept. 1997)

WK Wee and MR Mackley.
The rheology and processing of a concentrated Cellulose Acetate solution.
Chem. Eng. Sci., 53, 6, 1131-1144 (1998)

P Gao, MR Mackley and DF Zhao.
The deformation and breakup of thermotropic droplets in a molten polypropylene matrix subject to oscillatory simple shear and entry flow.
Journal of Non-Newtonian Fluid Mechanics, 80, 199-216 (1999)

Return to the Polymer Fluids Group's main publication page